

Sagola D1-40 Double Diaphragm Pneumatic Pump


The Sagola D1-40 Double Diaphragm Pneumatic Pump is ideal for high production industries.
- Resumen
-
Resumen
-
- 40 litre double diaphragm pump.
- Spraying equipment for high production industries.
- Can be used with several guns.
- Double outlet version to work with two guns.
- Special version for abrasive products.
- 1:1 Ratio.
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
-
- Características más importantes
-
Características más importantes
Sagola D1-40 Double Diaphragm Pneumatic Pump
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
-
- Información técnica
-
Características TécnicasSagola D1-40 Double Diaphragm Pneumatic Pump
Pressure ratio 1:1 Max. air consumption (60 cycles/min.) 580LPM (20 CFM) Maximum air inlet pressure 7bar (102psi) Min. inlet hose diameter Ø 6mm (1/4”) Lubricant SAE 10 Max. product output pressure 7bar (102psi) Flow Rate @ 60 cycles/min (Free Flow) 40LPM (1.41CFM) Air inlet Female 1/4" GAS BSP Product outlet Male 3/8" BSP Weight (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 18.5kg (40.79lbs), With Product Tank: 18kg (39.68lb) Dimensions (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 465 x 501 x 953mm (18.31 x 19.72 x 37.52"), With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52") Lista de empaque Elcometer D1-40 Low Pressure Air Spray Double Diaphragm Transfer Pump
-
- Descargas
-
- Referencia
-
ReferenciaSagola D1-40 Double Diaphragm Pneumatic PumpNo data found!!
-
Elcometer D1-40 (Trolley and Suction Probe)
- Referencia : PSD140AS-CSR
-
Elcometer D1-40 (Trolley and 5L (35.2fl oz) Gravity Pot)
- Referencia : PSD140AS-CTR
-
Elcometer D1-40 (Trolley and Suction Probe) For Abrasive Products
- Referencia : PSD140AS-CAR
-
Elcometer D1-40 (Trolley and Suction Probe) With Double Outlet Product
- Referencia : PSD140AS-CDR
-
Elcometer D1-40 (Wall Support and Suction Probe)
- Referencia : PSD140AS-WSR
-
Elcometer D1-40 (Wall Support and Gravity Deposit)
- Referencia : PSD140AS-WTR
-
Elcometer D1-40 Full Equipment Kit
- Referencia : PSD140AS-CSRK
- Accesorios
-
AccesoriosSagola D1-40 Double Diaphragm Pneumatic Pump
- ReferenciaPT56414130
- ReferenciaPT56414039
- ReferenciaPT56414044
- ReferenciaPT56414040
- ReferenciaPT56414041
- ReferenciaPT56414042
- ReferenciaPT52410019
- ReferenciaPT30090091
- ReferenciaPT83660030
- ReferenciaPT83660029
- ReferenciaPT54550016
- ReferenciaPT49000478
- ReferenciaPT83660047
- ReferenciaPT56418583
-
- Home
- Equipamiento de Pintado
- Refinishing & Bodyshop Spray Equipment
- Fluid Application
- Double Membrane Pneumatic Pumps
- Sagola D1-40 Double Diaphragm Pneumatic Pump
Sagola D1-40 Double Diaphragm Pneumatic Pump
The Sagola D1-40 Double Diaphragm Pneumatic Pump is ideal for high production industries.
Resumen
Sagola D1-40 Double Diaphragm Pneumatic Pump
- 40 litre double diaphragm pump.
- Spraying equipment for high production industries.
- Can be used with several guns.
- Double outlet version to work with two guns.
- Special version for abrasive products.
- 1:1 Ratio.
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
Características más importantes
Sagola D1-40 Double Diaphragm Pneumatic Pump
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
Características TécnicasSagola D1-40 Double Diaphragm Pneumatic PumpPressure ratio 1:1 Max. air consumption (60 cycles/min.) 580LPM (20 CFM) Maximum air inlet pressure 7bar (102psi) Min. inlet hose diameter Ø 6mm (1/4”) Lubricant SAE 10 Max. product output pressure 7bar (102psi) Flow Rate @ 60 cycles/min (Free Flow) 40LPM (1.41CFM) Air inlet Female 1/4" GAS BSP Product outlet Male 3/8" BSP Weight (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 18.5kg (40.79lbs), With Product Tank: 18kg (39.68lb) Dimensions (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 465 x 501 x 953mm (18.31 x 19.72 x 37.52"), With Product Tank: 639 x 511 x 953mm (25.16 x 20.12 x 37.52") Lista de empaque Elcometer D1-40 Low Pressure Air Spray Double Diaphragm Transfer Pump ReferenciaSagola D1-40 Double Diaphragm Pneumatic PumpNo data found!!-
Elcometer D1-40 (Trolley and Suction Probe)
- Referencia : PSD140AS-CSR
-
Elcometer D1-40 (Trolley and 5L (35.2fl oz) Gravity Pot)
- Referencia : PSD140AS-CTR
-
Elcometer D1-40 (Trolley and Suction Probe) For Abrasive Products
- Referencia : PSD140AS-CAR
-
Elcometer D1-40 (Trolley and Suction Probe) With Double Outlet Product
- Referencia : PSD140AS-CDR
-
Elcometer D1-40 (Wall Support and Suction Probe)
- Referencia : PSD140AS-WSR
-
Elcometer D1-40 (Wall Support and Gravity Deposit)
- Referencia : PSD140AS-WTR
-
Elcometer D1-40 Full Equipment Kit
- Referencia : PSD140AS-CSRK
AccesoriosSagola D1-40 Double Diaphragm Pneumatic Pump- Referencia: PT56414130
- Referencia: PT56414039
- Referencia: PT56414044
- Referencia: PT56414040
- Referencia: PT56414041
- Referencia: PT56414042
- Referencia: PT52410019
- Referencia: PT30090091
- Referencia: PT83660030
- Referencia: PT83660029
- Referencia: PT54550016
- Referencia: PT49000478
- Referencia: PT83660047
- Referencia: PT56418583
- Referencia
-