Elcometer D1-30 Double Diaphragm Pneumatic Pump
The Sagola D1-30 Double Diaphragm Pump is ideal for use in medium production industries.
- Resumen
-
Resumen
-
- 30 litre double diaphragm pump.
- Pump for medium production industries.
- Special for finishes and primers.
- High precision product regulator.
- Anti-pulsation system and double paint filter.
- 1:1 Ratio
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
-
- Características más importantes
-
Características más importantes
Elcometer D1-30 Double Diaphragm Pneumatic Pump
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
-
- Información técnica
-
Características TécnicasElcometer D1-30 Double Diaphragm Pneumatic Pump
Pressure ratio 1:1 Max. air consumption (60 cycles/min.) 380l/min (13cfm) Maximum air inlet pressure 6bar (87psi) Min. inlet hose diameter Ø 6mm (1/4”) Lubricant SAE 10 Max. product output pressure 6bar (87psi) Flow Rate @ 60 cycles/min (Free Flow) 30LPM (1.06CFM) Air inlet Female 1/4" GAS BSP Product outlet Male 3/8" BSP Weight (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 8.25kg (18.19lbs), With Product Tank: 7.75kg (17.09lbs) Dimensions (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 267 x 322 x 556mm (10.51 x 12.68 x 21.89"), With Product Tank: 374 x 513 x 556mm (14.72 x 20.20 x 21.89") Lista de empaque Elcometer D1-30 Low Pressure Air Spray Double Diaphragm Transfer Pump
-
- Descargas
-
Descargas
Sagola Double Membrane Pneumatic Pumps - Instructor Manual
- Referencia
-
ReferenciaElcometer D1-30 Double Diaphragm Pneumatic Pump
-
Elcometer D1-30 (Frame, Suction Hose and Regulator)- Referencia : PSD130AS-FSR
-
Elcometer D1-30 (Frame, Suction Hose)- Referencia : PSD130AS-FS-
-
Elcometer D1-30 (Frame, Product Tank and Regulator)- Referencia : PSD130AS-FTR
-
Elcometer D1-30 (Frame, Product Tank)- Referencia : PSD130AS-FT-
-
Elcometer D1-30 (Wall Support, Suction Probe and Regulator)- Referencia : PSD130AS-WSR
-
Elcometer D1-30 (Wall Support, Suction Probe)- Referencia : PSD130AS-WS-
-
Elcometer D1-30 (Wall Support, Gravity Deposit and Regulator)- Referencia : PSD130AS-WTR
-
Elcometer D1-30 (Wall Support, Gravity Deposit)- Referencia : PSD130AS-WT-
-
Elcometer D1-30 Full Equipment Kit- Referencia : PSD130AS-FS-K
- Accesorios
-
AccesoriosElcometer D1-30 Double Diaphragm Pneumatic Pump
ReferenciaPT56414130
ReferenciaPT56414039
ReferenciaPT56414044
ReferenciaPT56414040
ReferenciaPT56414041
ReferenciaPT56414042
ReferenciaPT52410019
ReferenciaPT30090091
ReferenciaPT83660030
ReferenciaPT83660029
ReferenciaPT54550016
ReferenciaPT49000478
ReferenciaPT83660047
ReferenciaPT56418583
-
Elcometer D1-30 Double Diaphragm Pneumatic Pump
The Sagola D1-30 Double Diaphragm Pump is ideal for use in medium production industries.
Resumen
Elcometer D1-30 Double Diaphragm Pneumatic Pump
- 30 litre double diaphragm pump.
- Pump for medium production industries.
- Special for finishes and primers.
- High precision product regulator.
- Anti-pulsation system and double paint filter.
- 1:1 Ratio
Compliance: ATEX 2 II GX, UNE-EN-13463-1:2011, UNE-EN ISO 12100:2012, EN 809, EN12621, EN12162, EN 1127-1
Características más importantes
Elcometer D1-30 Double Diaphragm Pneumatic Pump
Components
1. Suction Hose
2. 5 litre (35.2fl oz) Product tank
3. Product inlet
4. Product outlet
5. Air pressure regulator (equipment)
6. Air pressure regulator (spray gun)
7. Antipulsation filter
8. Product pressure regulator
9. Pressure gauge (equipment)
10. Pressure gauge (spray gun)
11. Earth lead
12. Air inlet to the equipment
13. Transport carriage
14. Wall mount
Características TécnicasElcometer D1-30 Double Diaphragm Pneumatic PumpPressure ratio 1:1 Max. air consumption (60 cycles/min.) 380l/min (13cfm) Maximum air inlet pressure 6bar (87psi) Min. inlet hose diameter Ø 6mm (1/4”) Lubricant SAE 10 Max. product output pressure 6bar (87psi) Flow Rate @ 60 cycles/min (Free Flow) 30LPM (1.06CFM) Air inlet Female 1/4" GAS BSP Product outlet Male 3/8" BSP Weight (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 8.25kg (18.19lbs), With Product Tank: 7.75kg (17.09lbs) Dimensions (including Frame or Trolley Mounted with Product Regulator) With Suction Pole: 267 x 322 x 556mm (10.51 x 12.68 x 21.89"), With Product Tank: 374 x 513 x 556mm (14.72 x 20.20 x 21.89") Lista de empaque Elcometer D1-30 Low Pressure Air Spray Double Diaphragm Transfer Pump ReferenciaElcometer D1-30 Double Diaphragm Pneumatic Pump-
Elcometer D1-30 (Frame, Suction Hose and Regulator)
- Referencia : PSD130AS-FSR
-
Elcometer D1-30 (Frame, Suction Hose)
- Referencia : PSD130AS-FS-
-
Elcometer D1-30 (Frame, Product Tank and Regulator)
- Referencia : PSD130AS-FTR
-
Elcometer D1-30 (Frame, Product Tank)
- Referencia : PSD130AS-FT-
-
Elcometer D1-30 (Wall Support, Suction Probe and Regulator)
- Referencia : PSD130AS-WSR
-
Elcometer D1-30 (Wall Support, Suction Probe)
- Referencia : PSD130AS-WS-
-
Elcometer D1-30 (Wall Support, Gravity Deposit and Regulator)
- Referencia : PSD130AS-WTR
-
Elcometer D1-30 (Wall Support, Gravity Deposit)
- Referencia : PSD130AS-WT-
-
Elcometer D1-30 Full Equipment Kit
- Referencia : PSD130AS-FS-K
AccesoriosElcometer D1-30 Double Diaphragm Pneumatic Pump-
Referencia: PT56414130
-
Referencia: PT56414039
-
Referencia: PT56414044
-
Referencia: PT56414040
-
Referencia: PT56414041
-
Referencia: PT56414042
-
Referencia: PT52410019
-
Referencia: PT30090091
-
Referencia: PT83660030
-
Referencia: PT83660029
-
Referencia: PT54550016
-
Referencia: PT49000478
-
Referencia: PT83660047
-
Referencia: PT56418583
- Referencia
-