Product Description
Technical Specification
Accessories
Instruction Manual
Data Sheet

Elcometer 207 Precision Ultrasonic Thickness Gauge

The Elcometer 207 series of Precision Ultrasonic Thickness Gauges is designed to provide accurate thickness measurements on thin materials.

All Elcometer 207 and 207DL precision gauges have the special PLAS mode. This is specifically designed to provide accurate readings when measuring thin plastics.

Using the latest transducer designs, the Elcometer 207 precision ultrasonic thickness gauges can accurately measure material thickness from 0.15 - 25.4mm (0.006-1”) without the need to change the measurement mode.

 

Elcometer 207 & 207DL Precision Ultrasonic Thickness Gauges
Elcometer 207 Ultrasonic Thickness GaugeElcometer 207DL Precision Thickness GaugeElcometer 207DL Precision Ultrasonic Gauge

Technical Specification

Part Number C207----1 C207DL----1
Model Elcometer 207 Elcometer 207DL
PLAS Mode*
Scan & Differential Modes
Alarm Mode
Data Output (immediate)
Data Logging (memory)   1000 readings
ElcoMaster® Software  
Certificate
Maximum Measurement Range 0.15 - 25.4mm (0.006 - 1”)
Velocity Range 1250 - 10000m/s (0.0492 - 0.3937 in/µs)
Accuracy & Resolution Accuracy(1): ±0.02mm (0.0008”); Resolution: 0.002mm (0.0001”)
Resolution 0.002mm (0.0001”)
Units Millimetres and Inches
Operating Temperature -30°C to 50°C (-20°F to 120°F)
Transducer Each unit is supplied with 15MHz, 6mm (¼”) microdot right angle transducer
Display 114mm (4½) Digit Liquid Crystal Display with backlight
Power AA 1.5V Alkaline or 1.2V NiCad cell
Battery Type (Life) 2 x AA 1.5V batteries (200 hours)
Weight 295g (10oz)
Dimensions 63 x 120 x 31mm (2.5 x 4.5 x 1.24")
Packing List

Elcometer 207 or 207DL gauge, ultrasonic couplant, 2 x batteries, carry case, microdot transducer, calibration certificate and operating instructions.
Elcometer 207DL: CD with ElcoMaster® software and data transfer cable

 

STANDARDS:

ASTM E 797, EN 15317

 

Calibration Certificate supplied as standard

*  To use the PLAS mode, a special Graphite delay line is required which must be ordered separately - see Accessories

 (1)Dependent on material and conditions

Accessories

T92016526

Precision Ultrasonic Transducer: Frequency 15.MHz, Crystal Diameter: 6.35mm (0.25”), Wearface Diameter: 7.42mm (0.3125”), Measurement Range in Steel: 0.15 - 25.4mm (0.006 - 1.0”)

T92016871 Graphite Delay Line (for PLAS mode)
T92015701 Ultrasonic Couplant, 120ml (4fl oz) Bottle

T92015701-5

Ultrasonic Couplant; 120ml (4fl oz), Pack of 5 Bottles