Product Description
Technical Specification
Accessories
Data Sheet

Elcometer 4695 Scrub Test Panels

In a typical scrub test, the coating is applied to the Leneta Scrub Test Panel at a specified film thickness, allowed to dry and then subjected to scrubbing with a straight-line scrub tester.

When used in accordance with ASTM D2486, Method A, a 10mil shim is inserted under the panel to accelerate failure and thereby reduce testing time. The scrub resistance is the number of scrub cycles required to remove the coating to a specified end point.

Alternatively, the loss in weight is determined after a specified number of scrub resistance cycles, with calculation of equivalent loss in film thickness.

These Scrub Test Panels are ideal for use with the Elcometer 1720 Washability & Abrasion Testers.

Elcometer 4695 Scrub Test Panels

Technical Specification

Part Number Description Chart Dimensions Quantity
per Box
Boxes
per Case
Box Case   mm inches    
K0004695M068 K0004695M268 Leneta Scrub Test Panel P121-10N 165 x 432 6½ x 17 100 5
K0004695M069 K0004695M269 Leneta Scrub Test Panel P122-10N 165 x 432 6½ x 17 100 5

Accessories

KT001720P012 ASTM Test Foil 250µm (10mils)