Elcometer 1615 Kits

In order to test a sample in accordance with a specified standard, a number of kits has been created to provide a single Impact Tester which, by using the appropriate kit, the user can work in accordance with a wide range of national and international standards. The Elcometer 1615 Variable Impact Tester.

 

1615 kit a

Kit A
Part Number: KT001615KITA
Can be used in accordance with:
ISO 6272:1993, EN 13523, JIS K 5600-5-3, DIN EN ISO 6272-1

  • Falling 1kg (2.2lb) weight with a 20mm (0.7”) punch
  • Stop collar
  • 27mm (1.06”) die with fixing screw
  • Sample clamp with two fixing screws
  • 3mm (0.12”) and 4mm (0.15”) hexagonal wrench

1615 kit d

Kit D
Part Number: KT001615KITD
Can be used in accordance with:
ISO 6272-1, BS EN ISO 6272-1, NF EN ISO 6272-1

  • Falling 1kg (2.2lb) weight with 20mm (0.78”) punch and stop key
  • 27mm (1.06”) die with fixing screw
  • Stop collar
  • Sample clamp with fixing screws,
  • 3mm (0.12”) and 4mm (0.15”) hexagonal wrench
1615 kit b

Kit B
Part Number: KT001615KITB
Can be used in accordance with:
ASTM D 2794, BS EN ISO 6272-2, ISO 6272-2 :2002, Qualicoat

  • Static indenter with 15.9mm (0.6”) punch
  • Falling 1kg (2.2lb) weight
  • 12.7mm (0.5”) punch
  • 16.3mm (0.64”) die with fixing screw
  • 3mm (0.12”) hexagonal wrench

kit e

Kit E
Part Number: KT001615KITE
Can be used in accordance with:
NF T30-017:1989

  • Falling 400g (0.9lb) weight with 23mm (0.90”) punch
  • 22mm (0.87”) die with fixing screw
  • 3mm (0.12”) hexagonal wrench
1615 kit c

Kit C
Part Number: KT001615KITC
Can be used in accordance with:
ASTM D 2794, BS6496:1984, EN 12206-1

  • Static indenter with 15.9mm (0.6”) punch
  • Falling 2lb (908g) weight
  • 16.3mm (0.64”) die with fixing screw
  • 3mm (0.12”) hexagonal wrench

1615 kit f

Kit F
Part Number: KT001615KITF
Can be used in accordance with:
ASTM D 2794, BS EN ISO 6272, DIN EN ISO 6272-1, EN 13523-5, ISO 6272, Qualicoat 2006, SN EN ISO 6272-1

  • Falling 1kg (2.2lb) weight with a 20mm (0.7”) punch
  • Stop collar
  • 27mm (1.06”) die with fixing screw
  • Sample clamp with two fixing screws
  • 3mm (0.12”) and 4mm (0.15”) hexagonal wrench
  • Static indenter with 15.9mm (0.6”) punch
  • Falling 1kg (2.2lb) weight
  • 12.7mm (0.5”) punch
  • 16.3mm (0.64”) die with fixing screw