Tungsten Carbide 45° Angled Liner with Aluminium Jacket
The abrasive blast (sandblast) nozzle is ideal for getting inside tight or hard to reach places such as behind flanges, around corners or inside pipes.
- Summary
-
Summary
-
The angled nozzle is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance.
-
- Technical Information
-
Technical SpecificationTungsten Carbide 45° Angled Liner with Aluminium Jacket
Part Number Nozzle No. Orifice Diameter Number of Holes Length Blast Nozzle Entry Diameter MT28442-2* #2 3.2mm (0.13") 1 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)25mm (1") MT28443-2* #2 3.2mm (0.13") 2 88mm (3.46") 25mm (1") MT28444-2* #2 3.2mm (0.13") 3 88mm (3.46") 25mm (1") MT28442-3* #3 4.8mm (0.19") 1 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)25mm (1") MT28443-3* #3 4.8mm (0.19") 2 88mm (3.46") 25mm (1") MT28444-3* #3 4.8mm (0.19") 3 88mm (3.46") 25mm (1") MT28442-4* #4 6.35mm (0.25") 1 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)25mm (1") MT28443-4* #4 6.35mm (0.25") 2 88mm (3.46") 25mm (1") MT28444-4* #4 6.35mm (0.25") 3 88mm (3.46") 25mm (1") MT28442-5* #5 8mm (0.31") 1 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)25mm (1") MT28443-5* #5 8mm (0.31") 2 88mm (3.46") 25mm (1") MT28444-5* #5 8mm (0.31") 3 88mm (3.46") 25mm (1") MT28442-6* #6 9.5mm (0.38") 1 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)25mm (1") MT28443-6* #6 9.5mm (0.38") 2 88mm (3.46") 25mm (1") MT28444-6* #6 9.5mm (0.38") 3 88mm (3.46") 25mm (1") Part Number MT28442-2* Nozzle No. #2 Orifice Diameter 3.2mm (0.13") Number of Holes 1 Length 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)Blast Nozzle Entry Diameter 25mm (1") Part Number MT28443-2* Nozzle No. #2 Orifice Diameter 3.2mm (0.13") Number of Holes 2 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28444-2* Nozzle No. #2 Orifice Diameter 3.2mm (0.13") Number of Holes 3 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28442-3* Nozzle No. #3 Orifice Diameter 4.8mm (0.19") Number of Holes 1 Length 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)Blast Nozzle Entry Diameter 25mm (1") Part Number MT28443-3* Nozzle No. #3 Orifice Diameter 4.8mm (0.19") Number of Holes 2 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28444-3* Nozzle No. #3 Orifice Diameter 4.8mm (0.19") Number of Holes 3 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28442-4* Nozzle No. #4 Orifice Diameter 6.35mm (0.25") Number of Holes 1 Length 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)Blast Nozzle Entry Diameter 25mm (1") Part Number MT28443-4* Nozzle No. #4 Orifice Diameter 6.35mm (0.25") Number of Holes 2 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28444-4* Nozzle No. #4 Orifice Diameter 6.35mm (0.25") Number of Holes 3 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28442-5* Nozzle No. #5 Orifice Diameter 8mm (0.31") Number of Holes 1 Length 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)Blast Nozzle Entry Diameter 25mm (1") Part Number MT28443-5* Nozzle No. #5 Orifice Diameter 8mm (0.31") Number of Holes 2 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28444-5* Nozzle No. #5 Orifice Diameter 8mm (0.31") Number of Holes 3 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28442-6* Nozzle No. #6 Orifice Diameter 9.5mm (0.38") Number of Holes 1 Length 2" Contractor Thread: 88mm (3.46")
1 1/4" NPSM Thread: 3.26” (83mm)Blast Nozzle Entry Diameter 25mm (1") Part Number MT28443-6* Nozzle No. #6 Orifice Diameter 9.5mm (0.38") Number of Holes 2 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1") Part Number MT28444-6* Nozzle No. #6 Orifice Diameter 9.5mm (0.38") Number of Holes 3 Length 88mm (3.46") Blast Nozzle Entry Diameter 25mm (1")
-
- Part Numbers
-
Part NumbersTungsten Carbide 45° Angled Liner with Aluminium Jacket
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2- Part Number : MT28443-2*
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2- Part Number : MT28444-2*
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2- Part Number : MT28442-2*
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3- Part Number : MT28442-3*
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3- Part Number : MT28443-3*
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3- Part Number : MT28444-3*
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4- Part Number : MT28442-4*
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4- Part Number : MT28443-4*
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4- Part Number : MT28444-4*
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5- Part Number : MT28442-5*
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5- Part Number : MT28443-5*
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5- Part Number : MT28444-5*
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6- Part Number : MT28442-6*
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6- Part Number : MT28443-6*
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6- Part Number : MT28444-6*
-
-
Tungsten Carbide 45° Angled Liner with Aluminium Jacket
The abrasive blast (sandblast) nozzle is ideal for getting inside tight or hard to reach places such as behind flanges, around corners or inside pipes.
Summary
Tungsten Carbide 45° Angled Liner with Aluminium Jacket
The angled nozzle is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance.
Technical Specification
Tungsten Carbide 45° Angled Liner with Aluminium Jacket
| Part Number | Nozzle No. | Orifice Diameter | Number of Holes | Length | Blast Nozzle Entry Diameter |
| MT28442-2* | #2 | 3.2mm (0.13") | 1 | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
25mm (1") |
| MT28443-2* | #2 | 3.2mm (0.13") | 2 | 88mm (3.46") | 25mm (1") |
| MT28444-2* | #2 | 3.2mm (0.13") | 3 | 88mm (3.46") | 25mm (1") |
| MT28442-3* | #3 | 4.8mm (0.19") | 1 | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
25mm (1") |
| MT28443-3* | #3 | 4.8mm (0.19") | 2 | 88mm (3.46") | 25mm (1") |
| MT28444-3* | #3 | 4.8mm (0.19") | 3 | 88mm (3.46") | 25mm (1") |
| MT28442-4* | #4 | 6.35mm (0.25") | 1 | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
25mm (1") |
| MT28443-4* | #4 | 6.35mm (0.25") | 2 | 88mm (3.46") | 25mm (1") |
| MT28444-4* | #4 | 6.35mm (0.25") | 3 | 88mm (3.46") | 25mm (1") |
| MT28442-5* | #5 | 8mm (0.31") | 1 | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
25mm (1") |
| MT28443-5* | #5 | 8mm (0.31") | 2 | 88mm (3.46") | 25mm (1") |
| MT28444-5* | #5 | 8mm (0.31") | 3 | 88mm (3.46") | 25mm (1") |
| MT28442-6* | #6 | 9.5mm (0.38") | 1 | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
25mm (1") |
| MT28443-6* | #6 | 9.5mm (0.38") | 2 | 88mm (3.46") | 25mm (1") |
| MT28444-6* | #6 | 9.5mm (0.38") | 3 | 88mm (3.46") | 25mm (1") |
| Part Number | MT28442-2* |
| Nozzle No. | #2 |
| Orifice Diameter | 3.2mm (0.13") |
| Number of Holes | 1 |
| Length | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28443-2* |
| Nozzle No. | #2 |
| Orifice Diameter | 3.2mm (0.13") |
| Number of Holes | 2 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28444-2* |
| Nozzle No. | #2 |
| Orifice Diameter | 3.2mm (0.13") |
| Number of Holes | 3 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28442-3* |
| Nozzle No. | #3 |
| Orifice Diameter | 4.8mm (0.19") |
| Number of Holes | 1 |
| Length | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28443-3* |
| Nozzle No. | #3 |
| Orifice Diameter | 4.8mm (0.19") |
| Number of Holes | 2 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28444-3* |
| Nozzle No. | #3 |
| Orifice Diameter | 4.8mm (0.19") |
| Number of Holes | 3 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28442-4* |
| Nozzle No. | #4 |
| Orifice Diameter | 6.35mm (0.25") |
| Number of Holes | 1 |
| Length | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28443-4* |
| Nozzle No. | #4 |
| Orifice Diameter | 6.35mm (0.25") |
| Number of Holes | 2 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28444-4* |
| Nozzle No. | #4 |
| Orifice Diameter | 6.35mm (0.25") |
| Number of Holes | 3 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28442-5* |
| Nozzle No. | #5 |
| Orifice Diameter | 8mm (0.31") |
| Number of Holes | 1 |
| Length | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28443-5* |
| Nozzle No. | #5 |
| Orifice Diameter | 8mm (0.31") |
| Number of Holes | 2 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28444-5* |
| Nozzle No. | #5 |
| Orifice Diameter | 8mm (0.31") |
| Number of Holes | 3 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28442-6* |
| Nozzle No. | #6 |
| Orifice Diameter | 9.5mm (0.38") |
| Number of Holes | 1 |
| Length | 2" Contractor Thread: 88mm (3.46") 1 1/4" NPSM Thread: 3.26” (83mm) |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28443-6* |
| Nozzle No. | #6 |
| Orifice Diameter | 9.5mm (0.38") |
| Number of Holes | 2 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
| Part Number | MT28444-6* |
| Nozzle No. | #6 |
| Orifice Diameter | 9.5mm (0.38") |
| Number of Holes | 3 |
| Length | 88mm (3.46") |
| Blast Nozzle Entry Diameter | 25mm (1") |
Part Numbers
Tungsten Carbide 45° Angled Liner with Aluminium Jacket
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2
- Part Number (2" Contractor Thread): MT28443-2C
- Part Number (1¼" NPSM Thread) : MT28443-2N
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2
- Part Number (2" Contractor Thread): MT28444-2C
- Part Number (1¼" NPSM Thread) : MT28444-2N
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.2
- Part Number (2" Contractor Thread): MT28442-2C
- Part Number (1¼" NPSM Thread) : MT28442-2N
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3
- Part Number (2" Contractor Thread): MT28442-3C
- Part Number (1¼" NPSM Thread) : MT28442-3N
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3
- Part Number (2" Contractor Thread): MT28443-3C
- Part Number (1¼" NPSM Thread) : MT28443-3N
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.3
- Part Number (2" Contractor Thread): MT28444-3C
- Part Number (1¼" NPSM Thread) : MT28444-3N
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
- Part Number (2" Contractor Thread): MT28442-4C
- Part Number (1¼" NPSM Thread) : MT28442-4N
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
- Part Number (2" Contractor Thread): MT28443-4C
- Part Number (1¼" NPSM Thread) : MT28443-4N
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.4
- Part Number (2" Contractor Thread): MT28444-4C
- Part Number (1¼" NPSM Thread) : MT28444-4N
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5
- Part Number (2" Contractor Thread): MT28442-5C
- Part Number (1¼" NPSM Thread) : MT28442-5N
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5
- Part Number (2" Contractor Thread): MT28443-5C
- Part Number (1¼" NPSM Thread) : MT28443-5N
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.5
- Part Number (2" Contractor Thread): MT28444-5C
- Part Number (1¼" NPSM Thread) : MT28444-5N
-
1 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
- Part Number (2" Contractor Thread): MT28442-6C
- Part Number (1¼" NPSM Thread) : MT28442-6N
-
2 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
- Part Number (2" Contractor Thread): MT28443-6C
- Part Number (1¼" NPSM Thread) : MT28443-6N
-
3 Hole Tungsten Carbide 45° Angled Liner with Aluminium Jacket No.6
- Part Number (2" Contractor Thread): MT28444-6C
- Part Number (1¼" NPSM Thread) : MT28444-6N