Elcometer
Menu
EN
  • EN
  • DE
  • ES
  • FR
  • NL
  • 中文
  • 日本語
Search...
  • ABOUT
  • COATING INSPECTION
    • ElcoMaster™ Software
    • Inspection Kits
      • Digital Inspection
      • Blasting inspection
      • Protetctive Coating Inspection
      • Coatings on Concrete Inspection
      • Hazardous Area Inspection
      • Automotive Inspection
      • Qualicoat and Powder Inspection
      • Surface Contamination
      • Soluble Salt and Ion Specific Inspection
      • Pinhole and Holiday Detection
      • HV and AC Duct Inspection Kit
    • Surface Cleanliness and Surface Profile
      • Surface Condition
      • Surface Cleanliness
      • Surface Profile
      • Surface Roughness
      • Blasting Parameters
    • Moisture and Corrosion Under Insulation
      • Moisture
      • Corrosion Under Insulation (CUI)
    • RH, Dewpoint and Temperature
      • Relative Humidity and Dewpoint
      • Temperature
      • Windspeed
      • Oven Temperature Profile 
    • Oven Temperature Profile 
    • Wet Film and Powder Thickness
      • Wet Film Combs
      • Wet Film Wheels
      • Pfund Thickness Gauge
      • Powder Thickness Measurement
    • Dry Film Thickness
      • Digital
      • Mechanical
      • Destructive
      • Calibration and Standards 
    • Material Thickness
    • Adhesion Testers
      • Pull Off Adhesion Testing
      • Push Off Adhesion Testing
      • Cross Hatch Adhesion Testers
      • Adhesion Verification Unit (AVU)
    • Pinhole and Porosity
      • Wet Sponge
      • High Voltage DC
      • High Voltage Pulsed DC
      • UV Pinhole
    • Inspection Accessories
  • PHYSICAL TEST EQUIPMENT
    • ViscosityMaster™ Software
    • Fineness of Grind
    • Density
    • Viscosity Cups
      • Flow Cups
      • Dip Cups
      • Viscosity Calibration Oils
    • Rotational and Krebs Viscosity 
    • Flow Gauges
    • Film Application
      • Automatic Film Application
      • Bar Coaters and Film Applicators
      • Levelling and Sag Testers
      • Test Charts
      • Vacuum Tables
    • Drying Time and Permeability
    • Washability and Abrasion 
    • Hardness and Scratch
    • Elasticity and Deformation 
      • Mandrel Bend Testing
      • Impact Testing
      • Cupping Testing
    • Flash Point 
  • APPEARANCE
    • Gloss and Reflectance 
    • Distinctiveness of Image (DOI)
    • Colour 
      • Spectrophotometer
      • Assessment Cabinets
      • RAL Colour Charts
  • CONCRETE INSPECTION
    • CoverMaster™ Software
    • Rebound Hammer 
    • Covermeters and Half-Cell Meters
    • Rebar and Stud Locators 
    • Metal Detection
    • Concrete Inspection
  • ULTRASONIC NDT
    • ElcoMaster™ Software
    • Ultrasonic Material Thickness Gauges
    • Precision Thickness Gauges
    • Flaw Detectors 
    • Bolt Tension Meters
    • Transducers & Accessories
      • Dual Element Transducers
      • Single Element Transducers
      • Flaw Detector Transducers
      • Bolt Gauge Transducers
      • Underwater Gauge Transducers
      • Sonic Gauge Transducers
      • Calibration Blocks
      • Accessories
  • CONTACT
  • ABOUT
  • COATING INSPECTION
  • PHYSICAL TEST EQUIPMENT
  • APPEARANCE
  • CONCRETE INSPECTION
  • ULTRASONIC NDT
  • CONTACT
  • Home
  • Coating Inspection
  • Surface Cleanliness & Surface Profile
  • Blasting Parameters

Blasting Parameters

Blasting Parameters
Blasting parameters: A number of important parameters need to be monitored during the blasting or water jetting process, these include: air pressure (at the nozzle), nozzle diameter, blast media contamination & pH values in order to avoid recontamination of the substrate during blasting.
Read More...

PRODUCTS

Elcometer 148 pH Tester

Elcometer 148 pH Tester

This simple, easy to use instrument measures both pH and temperature using a single sensor.
Elcometer 134A Chloride Ion Test Kit for Abrasives

Elcometer 134A Chloride Ion Test Kit for Abrasives

Can accurately identify chlorides deposited on a surface by contaminated abrasives during blasting.
Elcometer 134W Chloride Ion Test Kit for Water

Elcometer 134W Chloride Ion Test Kit for Water

This kit is ideal for testing salt contamination in wash water and blast water.
Elcometer 102 Needle Pressure Gauge

Elcometer 102 Needle Pressure Gauge

This gauge is designed to measure air pressure in blast and air hoses.
Elcometer 103 Blast Nozzle Gauge

Elcometer 103 Blast Nozzle Gauge

This gauge is designed to measure the orifice size of an abrasive blasting nozzle.
 

PRODUCTS

ElcoMaster<sup>™</sup> Software Surface Cleanliness & Surface Profile Moisture & Corrosion Under Insulation RH, Dewpoint & Temperature Oven Temperature Profile Wet Film & Powder Thickness Dry Film Thickness Material Thickness Adhesion Testers Pinhole & Porosity Inspection Accessories Inspection Kits Appearance, Gloss, DOI, Colour Fineness of Grind Density Viscosity Cups Rotational & Krebs Viscosity Film Application Drying Time & Permeability Washability & Abrasion Hardness & Scratch Elasticity & Deformation Concrete & Metal Detection Flash Point Ultrasonic NDT
 

SERVICE & SUPPORT

  • Contact Us
  • Request a Catalogue
  • Service & Technical Support
  • Extend Your Warranty
  • Software Download
  • International Standards
  • Exhibition Calendar
  • What's New
  • Product List
  • Historical Products
 

COMPANY

  • About Elcometer
  • Company Policies
  • Terms & Conditions
  • Quality & ISO Certification

  • Careers

  • Videos

 

CONTACT







Elcometer
  • ABOUT
  • COATING INSPECTION
  • PHYSICAL TEST EQUIPMENT
  • APPEARANCE
  • CONCRETE INSPECTION
  • ULTRASONIC NDT
  • CONTACT
  • Login
  • Press
  • Sitemap
  • Privacy Policy
  • Copyright
  • © Elcometer Limited 2016
© Elcometer Limited