Elcometer 211 Mechanical Coating Thickness Gauge
- Protective Coatings
The Elcometer 211 Coating Thickness Gauge, commonly referred to as the “Banana Gauge”, is a Type I instrument designed to measure dry film thickness.
- Summary
-
Summary
-
Ready to Use
Calibrated and ready for immediate use
The Elcometer 211 is factory calibrated with user calibration adjustment and also comes with foils to check calibration on site.
Accurate
Small and portable with ±5% accuracy
Available in either Metric or Imperial versions, the Elcometer 211 measures coatings up to 6mm (250mils).
Versatile
Ideal for use in a range of environments
Ideal for environments where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production, it can also be used for underwater* coating inspection. The “V” grooved base also makes it ideal for pipeline inspection.
The Banana Gauge is ideal for use in environments where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production, and for underwater* dry film coating thickness inspection.
This is one of the most popular mechanical coating thickness gauges in the world.
- Factory calibrated - with user calibration adjustment
- Foils supplied to check calibration on site
- Ideal for cold surfaces and underwater use
- Small and portable with an accuracy ±5%
- The “V” grooved base, ideal for pipeline inspection
- Available in either Metric or Imperial versions, the Elcometer 211 measures coatings up to 6mm (250mils)
* Underwater use voids the warranty and users should replace the gauges periodically
-
- Technical Information
-
Technical SpecificationElcometer 211 Mechanical Coating Thickness Gauge
Part Number Description Range Certificate A211F--1M Elcometer 211 Mechanical Coating Thickness Gauge 0 - 1,000μm 
A211F--8M Elcometer 211 Mechanical Coating Thickness Gauge 0.65 - 6mm A211F--1E Elcometer 211 Mechanical Coating Thickness Gauge 0 - 40mils A211F--8E Elcometer 211 Mechanical Coating Thickness Gauge 25 - 250mils Accuracy ±5% of the reading or ±2.5μm/0.1mil (whichever is the greater) Substrate Thickness 0.4mm (16mils) minimum Measurement Area 30mm (1.18”) Diameter minimum Edge Effects Must be at least 6mm (0.24”) from edge Dimensions 200 x 60 x 30mm (7.8 x 2.4 x 1.2”) Packing List Elcometer 211, calibration foil set, carry pouch, wrist strap and operating instructions Part Number Description Certificate A211F--1M Elcometer 211 Mechanical Coating Thickness Gauge Range 0 - 1,000μm A211F--8M Elcometer 211 Mechanical Coating Thickness Gauge Range 0.65 - 6mm A211F--1E Elcometer 211 Mechanical Coating Thickness Gauge Range 0 - 40mils A211F--8E Elcometer 211 Mechanical Coating Thickness Gauge Range 25 - 250mils Accuracy ±5% of the reading or ±2.5μm/0.1mil (whichever is the greater) Substrate Thickness 0.4mm (16mils) minimum Measurement Area 30mm (1.18”) Diameter minimum Edge Effects Must be at least 6mm (0.24”) from edge Dimensions 200 x 60 x 30mm (7.8 x 2.4 x 1.2”) Packing List Elcometer 211, calibration foil set, carry pouch, wrist strap and operating instructions ○ Optional Calibration Certificate available.
-
- Standards
-
StandardsElcometer 211 Mechanical Coating Thickness Gauge
AS 2331.1.3, AS 3894.3-A, ASTM G 12, ASTM B 499, AS/NZS 1580.108.1, BS 5411-11, BS 3900-C5-6A, DIN 50981, ISO 2178, ISO 2808-6A, ISO 2808-7A, JIS K 5600-1-7,NF T 30-124, SSPC-PA2
Standards in grey have been superseded but are still recognised in some industries.
-
- Downloads
-
Downloads
-
Elcometer 211 Mechanical Coating Thickness Gauge Instruction Manual
-
Elcometer 211 Mechanical Coating Thickness Gauge Datasheet
- Part Numbers
-
Part NumbersElcometer 211 Mechanical Coating Thickness Gauge
-
Elcometer 211 Mechanical Coating Thickness Gauge- Range: 0 - 1,000μm
- Part Number : A211F--1M
-
Elcometer 211 Mechanical Coating Thickness Gauge- Range: 0.65 - 6mm
- Part Number : A211F--8M
-
Elcometer 211 Mechanical Coating Thickness Gauge- Range: 0 - 40mils
- Part Number : A211F--1E
-
Elcometer 211 Mechanical Coating Thickness Gauge- Range: 25 - 250mils
- Part Number : A211F--8E
Elcometer 211 Mechanical Coating Thickness Gauge
- Protective Coatings
The Elcometer 211 Coating Thickness Gauge, commonly referred to as the “Banana Gauge”, is a Type I instrument designed to measure dry film thickness.
Ready to Use
Calibrated and ready for immediate use
The Elcometer 211 is factory calibrated with user calibration adjustment and also comes with foils to check calibration on site.
Accurate
Small and portable with ±5% accuracy
Available in either Metric or Imperial versions, the Elcometer 211 measures coatings up to 6mm (250mils).
Versatile
Ideal for use in a range of environments
Ideal for environments where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production, it can also be used for underwater* coating inspection. The “V” grooved base also makes it ideal for pipeline inspection.
Summary
Elcometer 211 Mechanical Coating Thickness Gauge
The Banana Gauge is ideal for use in environments where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production, and for underwater* dry film coating thickness inspection.
This is one of the most popular mechanical coating thickness gauges in the world.
- Factory calibrated - with user calibration adjustment
- Foils supplied to check calibration on site
- Ideal for cold surfaces and underwater use
- Small and portable with an accuracy ±5%
- The “V” grooved base, ideal for pipeline inspection
- Available in either Metric or Imperial versions, the Elcometer 211 measures coatings up to 6mm (250mils)
* Underwater use voids the warranty and users should replace the gauges periodically
Downloads-
Elcometer 211 Mechanical Coating Thickness Gauge Instruction Manual
-
Elcometer 211 Mechanical Coating Thickness Gauge Datasheet
Technical SpecificationElcometer 211 Mechanical Coating Thickness GaugePart Number Description Range Certificate A211F--1M Elcometer 211 Mechanical Coating Thickness Gauge 0 - 1,000μm A211F--8M Elcometer 211 Mechanical Coating Thickness Gauge 0.65 - 6mm A211F--1E Elcometer 211 Mechanical Coating Thickness Gauge 0 - 40mils A211F--8E Elcometer 211 Mechanical Coating Thickness Gauge 25 - 250mils Accuracy ±5% of the reading or ±2.5μm/0.1mil (whichever is the greater) Substrate Thickness 0.4mm (16mils) minimum Measurement Area 30mm (1.18”) Diameter minimum Edge Effects Must be at least 6mm (0.24”) from edge Dimensions 200 x 60 x 30mm (7.8 x 2.4 x 1.2”) Packing List Elcometer 211, calibration foil set, carry pouch, wrist strap and operating instructions Part Number Description Certificate A211F--1M Elcometer 211 Mechanical Coating Thickness Gauge Range 0 - 1,000μm A211F--8M Elcometer 211 Mechanical Coating Thickness Gauge Range 0.65 - 6mm A211F--1E Elcometer 211 Mechanical Coating Thickness Gauge Range 0 - 40mils A211F--8E Elcometer 211 Mechanical Coating Thickness Gauge Range 25 - 250mils Accuracy ±5% of the reading or ±2.5μm/0.1mil (whichever is the greater) Substrate Thickness 0.4mm (16mils) minimum Measurement Area 30mm (1.18”) Diameter minimum Edge Effects Must be at least 6mm (0.24”) from edge Dimensions 200 x 60 x 30mm (7.8 x 2.4 x 1.2”) Packing List Elcometer 211, calibration foil set, carry pouch, wrist strap and operating instructions ○ Optional Calibration Certificate available.StandardsElcometer 211 Mechanical Coating Thickness GaugeAS 2331.1.3, AS 3894.3-A, ASTM G 12, ASTM B 499, AS/NZS 1580.108.1, BS 5411-11, BS 3900-C5-6A, DIN 50981, ISO 2178, ISO 2808-6A, ISO 2808-7A, JIS K 5600-1-7,NF T 30-124, SSPC-PA2
Standards in grey have been superseded but are still recognised in some industries.
Part NumbersElcometer 211 Mechanical Coating Thickness Gauge-
Elcometer 211 Mechanical Coating Thickness Gauge
- Range: 0 - 1,000μm
- Part Number : A211F--1M
-
Elcometer 211 Mechanical Coating Thickness Gauge
- Range: 0.65 - 6mm
- Part Number : A211F--8M
-
Elcometer 211 Mechanical Coating Thickness Gauge
- Range: 0 - 40mils
- Part Number : A211F--1E
-
Elcometer 211 Mechanical Coating Thickness Gauge
- Range: 25 - 250mils
- Part Number : A211F--8E
-
-