Elcometer Blasting Inspection Kits

  • Protective Coatings
blast-inspection-kit-orange-small
Blasting-Elcometer-224-small

The Elcometer Blasting Inspection Kit is a surface preparation inspection kit providing a range of inspection equipment to test surface profile and surface contamination of blasted profiles.

  • Summary
    • Summary

    • An Elcometer 456 Gauge and probe can also be supplied. (Order separately if required).

      Measurement parameters include:

      • Surface assessment
      • Blast equipment inspection
      • Surface profile
      • Surface contamination

       

  • Key Features
  • Technical Information
    • Technical Specification
      Elcometer Blasting Inspection Kits
      Part Number Description
      Metric Imperial  
      YKIT-BLAST-1M YKIT-BLAST-1E Elcometer Blasting Inspection Kit 1
      YKIT-BLAST-2M YKIT-BLAST-2E Elcometer Blasting Inspection Kit 2
      Dimensions Kit 1: 495 x 420 x 175mm (19.49 x 16.54 x 6.89")
      Kit 2: 575 x 475 x 205mm (22.64 x 18.70 x 8.07")
      Part Number
      Metric Imperial
      YKIT-BLAST-1M YKIT-BLAST-1E
      Description Elcometer Blasting Inspection Kit 1
      YKIT-BLAST-2M YKIT-BLAST-2E
      Description Elcometer Blasting Inspection Kit 2
      Dimensions Kit 1: 495 x 420 x 175mm (19.49 x 16.54 x 6.89")
      Kit 2: 575 x 475 x 205mm (22.64 x 18.70 x 8.07")
  • Standards
    • Standards
      Elcometer Blasting Inspection Kits

      AS 3894.5, AS 3894.6-A, AS 3894.6-C, AS 3894.6-D, ASTM D 2200, ASTM D 4417-A, ASTM D 4417-B, ASTM D 4417-C, BS 7079-C5, IMO MSC.215(82), IMO MSC.244(83), ISO 8501-1, ISO 8502-3, ISO 8502-5, ISO 8502-6, ISO 8502-9, ISO 8503-1, ISO 8503-2, ISO 8503-5, NACE RP0287, SANS 5772, SS 55900, SSPC Guide 15, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

      Standards in grey have been superseded but are still recognised in some industries.

  • Downloads
    • Downloads
        • Elcometer Blasting Inspection Kits Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer Blasting Inspection Kits
      • Elcometer喷砂检测套装 1 - Metric
        • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
        • Part Number : YKIT-BLAST-1M
      • Elcometer Blasting Inspection Kit 1 - Imperial
        • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
        • Part Number : YKIT-BLAST-1E
      • Elcometer Blasting Inspection Kit 2 - Metric
        • Dimensions: 575 x 475 x 205mm (22.64 x 18.70 x 8.07”)
        • Part Number : YKIT-BLAST-2M
      • Elcometer Blasting Inspection Kit 2 - Imperial
        • Dimensions: 575 x 475 x 205mm (22.64 x 18.70 x 8.07”)
        • Part Number : YKIT-BLAST-2E

Elcometer Blasting Inspection Kits

  • Protective Coatings
blast-inspection-kit-orange-small
Blasting-Elcometer-224-small

The Elcometer Blasting Inspection Kit is a surface preparation inspection kit providing a range of inspection equipment to test surface profile and surface contamination of blasted profiles.

Summary

Elcometer Blasting Inspection Kits

An Elcometer 456 Gauge and probe can also be supplied. (Order separately if required).

Measurement parameters include:

  • Surface assessment
  • Blast equipment inspection
  • Surface profile
  • Surface contamination

 

Downloads
    • Elcometer Blasting Inspection Kits Datasheet

Key Features

Elcometer Blasting Inspection Kits

ModelDescriptionKit 1Kit 2
Elcometer 128

Pictorial Standards1

Elcometer 102Needle Pressure Gauge
Elcometer 103Blast Nozzle Gauge
Elcometer 125Surface Comparator, Grit
Elcometer 125Surface Comparator, Shot
Elcometer 122Testex Tape, Coarse
Elcometer 122Testex Tape, Extra Coarse
Elcometer 124Testex Dial Thickness Gauge
Elcometer 224Surface Profile Separate Gauge, Model T
Elcometer 224Standard Separate Probe
Elcometer 142Dust Tape Test Kit
Elcometer 134Chlor*Test Surface Testing Kit
Elcometer 134Chlor*Test Abrasive Testing Kit
Elcometer 134Chlor*Test Water Testing Kit
Elcometer 138

Bresle Salt Kit2

Elcometer 138/2Surface Contamination Kit
ElcoMaster®Data Management Software & USB Cable

¹ Swedish Rust Standard ISO 8501, SIS055900 supplied in Metric Kit
US Standard SSPC VIS 1-01 and VIS-3 supplied in Imperial Kit

2 Supplied with Elcometer 135C Bresle Test Patches (x50)

Technical Specification
Elcometer Blasting Inspection Kits
Part Number Description
Metric Imperial  
YKIT-BLAST-1M YKIT-BLAST-1E Elcometer Blasting Inspection Kit 1
YKIT-BLAST-2M YKIT-BLAST-2E Elcometer Blasting Inspection Kit 2
Dimensions Kit 1: 495 x 420 x 175mm (19.49 x 16.54 x 6.89")
Kit 2: 575 x 475 x 205mm (22.64 x 18.70 x 8.07")
Part Number
Metric Imperial
YKIT-BLAST-1M YKIT-BLAST-1E
Description Elcometer Blasting Inspection Kit 1
YKIT-BLAST-2M YKIT-BLAST-2E
Description Elcometer Blasting Inspection Kit 2
Dimensions Kit 1: 495 x 420 x 175mm (19.49 x 16.54 x 6.89")
Kit 2: 575 x 475 x 205mm (22.64 x 18.70 x 8.07")
Standards
Elcometer Blasting Inspection Kits

AS 3894.5, AS 3894.6-A, AS 3894.6-C, AS 3894.6-D, ASTM D 2200, ASTM D 4417-A, ASTM D 4417-B, ASTM D 4417-C, BS 7079-C5, IMO MSC.215(82), IMO MSC.244(83), ISO 8501-1, ISO 8502-3, ISO 8502-5, ISO 8502-6, ISO 8502-9, ISO 8503-1, ISO 8503-2, ISO 8503-5, NACE RP0287, SANS 5772, SS 55900, SSPC Guide 15, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

Standards in grey have been superseded but are still recognised in some industries.

Part Numbers
Elcometer Blasting Inspection Kits
  • Elcometer喷砂检测套装 1 - Metric
    • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
    • Part Number : YKIT-BLAST-1M
  • Elcometer Blasting Inspection Kit 1 - Imperial
    • Dimensions: 495 x 420 x 175mm (19.49 x 16.54 x 6.89”)
    • Part Number : YKIT-BLAST-1E
  • Elcometer Blasting Inspection Kit 2 - Metric
    • Dimensions: 575 x 475 x 205mm (22.64 x 18.70 x 8.07”)
    • Part Number : YKIT-BLAST-2M
  • Elcometer Blasting Inspection Kit 2 - Imperial
    • Dimensions: 575 x 475 x 205mm (22.64 x 18.70 x 8.07”)
    • Part Number : YKIT-BLAST-2E