Elcometer 2020 Fineness of Grind Gauges

  • Industrial Finishing
  • Laboratory & Physical Test
2020-Fineness-of-Grind
2020-Fineness-of-Grind-close-up

The Elcometer 2020 Fineness of Grind Gauges is used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products.

  • Summary
    • Summary

    • These two channel gauges, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen).

      Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have an accuracy of ±3μm (0.12mil) or ±5% whichever is the greater. The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”).

  • Key Features
    • Key Features

      Elcometer 2020 Fineness of Grind Gauges

      How-to-use-Fineness-of-Grind

      How to use a Fineness of Grind Gauge

      The material is placed on the deepest part of the groove and, using the scraper provided, drawn up the slope - the particle size is indicated where the material stops.

  • Technical Information
    • Technical Specification
      Elcometer 2020 Fineness of Grind Gauges
      Part Number   Model Range Graduation Hegman Paint Club Certificate
      Metric Imperial   (μm) (mils) (μm) (mils) (NS or H) (PCU)  
      K0002020M003 - Elcometer 2020/3 0 - 15 - 1.5 - 8 - 7 10 - 9 Optional Calibration Certificate available
      K0002020M004 K0US2020M004 Elcometer 2020/4 0 - 25 0 - 1 2.5 0.1 8 - 6 10 - 8 Optional Calibration Certificate available
      K0002020M001 K0US2020M001 Elcometer 2020/1 0 - 50 0 - 2 5 0.2 8 - 4 10 - 5 Optional Calibration Certificate available
      K0002020M002 K0US2020M002 Elcometer 2020/2 0 - 100 0 - 4 10 0.5 8 - 0 10 - 0 Optional Calibration Certificate available
      Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”)
      Packed Weight 1.36kg (3lb)
      Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions
      Part Number
      Metric K0002020M003
      Imperial -
      Model Elcometer 2020/3
      Certificate Optional Calibration Certificate available
      Range (μm) :    0 - 15
      (mils) :   -
      Graduation (μm) :    1.5
      (mils) :   -
      Hegman(NS or H) 8 - 7
      Paint Club(PCU) 10 - 9
      Metric K0002020M004
      Imperial K0US2020M004
      Model Elcometer 2020/4
      Certificate Optional Calibration Certificate available
      Range (μm) :    0 - 25
      (mils) :   0 - 1
      Graduation (μm) :    2.5
      (mils) :   0.1
      Hegman(NS or H) 8 - 6
      Paint Club(PCU) 10 - 8
      Metric K0002020M001
      Imperial K0US2020M001
      Model Elcometer 2020/1
      Certificate Optional Calibration Certificate available
      Range (μm) :    0 - 50
      (mils) :   0 - 2
      Graduation (μm) :    5
      (mils) :   0.2
      Hegman(NS or H) 8 - 4
      Paint Club(PCU) 10 - 5
      Metric K0002020M002
      Imperial K0US2020M002
      Model Elcometer 2020/2
      Certificate Optional Calibration Certificate available
      Range (μm) :    0 - 100
      (mils) :   0 - 4
      Graduation (μm) :    10
      (mils) :   0.5
      Hegman(NS or H) 8 - 0
      Paint Club(PCU) 10 - 0
      Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”)
      Packed Weight 1.36kg (3lb)
      Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions
      Optional Calibration Certificate available.
  • Standards
    • Standards
      Elcometer 2020 Fineness of Grind Gauges

      ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046

      Standards in grey have been superseded but are still recognised in some industries

  • Downloads
    • Downloads
        • Elcometer 2020 Fineness of Grind Gauge Multi-Lingual Instruction Manual

        • Elcometer 2020 Fineness of Grind Gauge Datasheet

  • Part Numbers
    • Part Numbers
      Elcometer 2020 Fineness of Grind Gauges
      • Elcometer 2020/1 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M001
      • Elcometer 2020/1 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M001C
      • Elcometer 2020/2 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M002
      • Elcometer 2020/2 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M002C
      • Elcometer 2020/3 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M003
      • Elcometer 2020/3 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M003C
      • Elcometer 2020/4 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M004
      • Elcometer 2020/4 Fineness of Grind Gauge - Metric
        • Part Number : K0002020M004C
      • Elcometer 2020/1 Fineness of Grind Gauge - Imperial
        • Part Number : K0US2020M001
      • Elcometer 2020/1 Fineness of Grind Gauge - Imperial
        • Part Number : K0US2020M001C
      • Elcometer 2020/2 Fineness of Grind Gauge - Imperial
        • Part Number : K0US2020M002
      • Elcometer 2020/2 Fineness of Grind Gauge - Imperial
        • Part Number : K0US2020M002C
      • Elcometer 2020/4 Fineness of Grind Gauge - Imperial
        • Part Number : K0US2020M004
      • Elcometer 2020/4 Fineness of Grind Gauge - Imperial
        • Part Number : K0US2020M004C
  • Accessories
    • Accessories
      Elcometer 2020 Fineness of Grind Gauges
      • Part Number: KT002020N001

Welcome to Elcometer.tv
Your ultimate training channel

Elcometer 2020 Fineness of Grind Gauges

  • Industrial Finishing
  • Laboratory & Physical Test
2020-Fineness-of-Grind
2020-Fineness-of-Grind-close-up

The Elcometer 2020 Fineness of Grind Gauges is used to determine the particle size and fineness of grind of many materials including paints, pigments, inks, coatings, chocolates and other similar products.

Summary

Elcometer 2020 Fineness of Grind Gauges

These two channel gauges, are made of hardened stainless steel and have two grooves with a graded slope (dependent on the model chosen).

Graduated in microns, mils, NS (Hegman) or PCU (North), the gauges have an accuracy of ±3μm (0.12mil) or ±5% whichever is the greater. The groove width for all models is 12mm (0.47”) with a groove length of 127mm (5.0”).

Downloads
    • Elcometer 2020 Fineness of Grind Gauge Multi-Lingual Instruction Manual

    • Elcometer 2020 Fineness of Grind Gauge Datasheet

Key Features

Elcometer 2020 Fineness of Grind Gauges

How-to-use-Fineness-of-Grind

How to use a Fineness of Grind Gauge

The material is placed on the deepest part of the groove and, using the scraper provided, drawn up the slope - the particle size is indicated where the material stops.

Technical Specification
Elcometer 2020 Fineness of Grind Gauges
Part Number   Model Range Graduation Hegman Paint Club Certificate
Metric Imperial   (μm) (mils) (μm) (mils) (NS or H) (PCU)  
K0002020M003 - Elcometer 2020/3 0 - 15 - 1.5 - 8 - 7 10 - 9 Optional Calibration Certificate available
K0002020M004 K0US2020M004 Elcometer 2020/4 0 - 25 0 - 1 2.5 0.1 8 - 6 10 - 8 Optional Calibration Certificate available
K0002020M001 K0US2020M001 Elcometer 2020/1 0 - 50 0 - 2 5 0.2 8 - 4 10 - 5 Optional Calibration Certificate available
K0002020M002 K0US2020M002 Elcometer 2020/2 0 - 100 0 - 4 10 0.5 8 - 0 10 - 0 Optional Calibration Certificate available
Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”)
Packed Weight 1.36kg (3lb)
Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions
Part Number
Metric K0002020M003
Imperial -
Model Elcometer 2020/3
Certificate Optional Calibration Certificate available
Range (μm) :    0 - 15
(mils) :   -
Graduation (μm) :    1.5
(mils) :   -
Hegman(NS or H) 8 - 7
Paint Club(PCU) 10 - 9
Metric K0002020M004
Imperial K0US2020M004
Model Elcometer 2020/4
Certificate Optional Calibration Certificate available
Range (μm) :    0 - 25
(mils) :   0 - 1
Graduation (μm) :    2.5
(mils) :   0.1
Hegman(NS or H) 8 - 6
Paint Club(PCU) 10 - 8
Metric K0002020M001
Imperial K0US2020M001
Model Elcometer 2020/1
Certificate Optional Calibration Certificate available
Range (μm) :    0 - 50
(mils) :   0 - 2
Graduation (μm) :    5
(mils) :   0.2
Hegman(NS or H) 8 - 4
Paint Club(PCU) 10 - 5
Metric K0002020M002
Imperial K0US2020M002
Model Elcometer 2020/2
Certificate Optional Calibration Certificate available
Range (μm) :    0 - 100
(mils) :   0 - 4
Graduation (μm) :    10
(mils) :   0.5
Hegman(NS or H) 8 - 0
Paint Club(PCU) 10 - 0
Packed Dimensions 180 x 40 x 12mm (7.1 x 1.6 x 0.5”)
Packed Weight 1.36kg (3lb)
Packing List Elcometer 2020 Fineness of Grind Gauge, scraper, plastic case and operating instructions
Optional Calibration Certificate available.
Standards
Elcometer 2020 Fineness of Grind Gauges

ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524, JIS K 5600-2-5, NF T30-046

Standards in grey have been superseded but are still recognised in some industries

Part Numbers
Elcometer 2020 Fineness of Grind Gauges
  • Elcometer 2020/1 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M001
  • Elcometer 2020/1 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M001C
  • Elcometer 2020/2 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M002
  • Elcometer 2020/2 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M002C
  • Elcometer 2020/3 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M003
  • Elcometer 2020/3 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M003C
  • Elcometer 2020/4 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M004
  • Elcometer 2020/4 Fineness of Grind Gauge - Metric
    • Part Number : K0002020M004C
  • Elcometer 2020/1 Fineness of Grind Gauge - Imperial
    • Part Number : K0US2020M001
  • Elcometer 2020/1 Fineness of Grind Gauge - Imperial
    • Part Number : K0US2020M001C
  • Elcometer 2020/2 Fineness of Grind Gauge - Imperial
    • Part Number : K0US2020M002
  • Elcometer 2020/2 Fineness of Grind Gauge - Imperial
    • Part Number : K0US2020M002C
  • Elcometer 2020/4 Fineness of Grind Gauge - Imperial
    • Part Number : K0US2020M004
  • Elcometer 2020/4 Fineness of Grind Gauge - Imperial
    • Part Number : K0US2020M004C
 

Welcome to Elcometer.tv
Your ultimate training channel

 
Accessories
Elcometer 2020 Fineness of Grind Gauges
  • Part Number: KT002020N001