Product Description
Technical Specification
Accessories
Data Sheet

Elcometer 355 Probe Range

Unique probe modules allow the Elcometer 355 Coating Thickness Gauge to be versatile and flexible for any coating thickness measurement application.

Probe modules can be freely interchanged as required for both ferrous (F) and non-ferrous (N) metal substrates.

Most coating thickness gauge probes are capable of an accuracy of ±1% of the reading on a variety of coatings and surfaces.

Telescopic probes extend from 410mm (16”) to 1100mm (43”).

Elcometer 355 Coating Thickness Gauge Probes
Elcometer 355 Probe Range

Technical Specification

Scale 1 Range:

0-1500μm (0-60mils)

Accuracy*: ±1% or ±1μm (±0.04mil)

Resolution:

0.1μm: 0-200μm; 0.5μm: 200-500μm; 1μm: 500-1500µm

(0.005mil: 0-8mils; 0.02mil: 8-20mils; 0.05mil: 20-60mils)

       
t3551152 rgb t3551153 rgb t35511959 rgb  n1 standard
Standard Right Angle Telescopic  N1 Standard 
       
Probe Design Part Number Minimum Headroom Minimum Sample Diameter Certificate
F1 Standard

T35511952

85mm (3.35")

6mm (0.24")

F1 Telescopic

T35511959

30mm (1.18")

6mm (0.24")

N1 Standard

T35511982

85mm (3.35")

8mm (0.31")

         
Scale 2 Range:

0-5mm (0-200mils)

Accuracy*: ±1% or ±5μm (±0.2mil)

Resolution:

2μm: 0-500μm; 5μm: 500-5000μm (0.1mil: 0-20mils; 0.2mil: 20-200mils)

       
t35512400 rgb t35511960 rgb t35511984 rgb  
F2 Standard F2 Telescopic N2 Standard  
       
Probe Design Part Number Minimum Headroom Minimum Sample Diameter Certificate
F2 Telescopic

T35511960

36mm (1.42")

10mm (0.39")

N2 Standard

T35511984

88mm (3.46")

18mm (0.71")

         
Scale 4      Range:

0-250µm (0-10mils)

Accuracy*: ±1% or ±1μm (±0.04mil)

Resolution:

0.1µm: 0-250µm (0.005mil: 0-10mils)

       
355 f4 Standard

t35511951 rgb

355 n4 standard  
F4 Standard F4 Right Angle (long)  N4 Standard   
       
Probe Design Part Number  Minimum Headroom  Minimum Sample Diameter  Certificate 
F4 Standard

T35511950

85mm (3.35")

4mm (0.16")

F4 Right Angle (long)

T35511951

18mm (0.71")

3mm (0.12")

N4 Standard

T35511980

90mm (3.54")

8mm (0.31")

         
Scale 5 Range:

0-800µm (0-32mils)

Accuracy*: ±1% or ±2μm (±0.08mil)

Resolution:

1µm: 0-800µm (0.1mil: 0-32mils)

       
t35511962 rgb      
F5 Rebar      
       
Probe Design Part Number Minimum Headroom Minimum Sample Diameter Certificate
F5 (Rebar)

T35511962

85mm (3.35")

4mm (0.16")

         
Scale 6     Range:

0-25mm (0-1000mils)

Accuracy*: ±2% or ±100μm (±4mils)

Resolution:

10µm: 0-5mm, 50µm: 5-25mm (0.5mil: 0-200mils, 2mil: 200-1000mils)

       
t35511964 rgb      
F6 Standard      
       
Probe Design Part Number Minimum Headroom Minimum Sample Diameter

Certificate

F6 Standard

T35511964

150mm (5.9")

51mm (2.0")

 

* Whichever is greater

Test certificate supplied as standard

 

Accessories

jumbo hand grip

Jumbo Hand Grip

Ideal for precision placement for the most accurate results on flat and curved surfaces. Place the probe inside the Jumbo Hand Grip and take measurements - ideal when wearing gloves.

T9997766-

Jumbo Hand Grip - F and N Probes

For use with the following Elcometer 355 probes:

F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard

     
V adaptor

V-Probe Adaptor

Ideal for precision placement for the most accurate results on medium and large diameter curved surfaces such as pipes and cylinders.

 

T9997381-

V-Probe Adaptor - F and N Probes

For use with the following Elcometer 355 probes:

F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard

 

 

proble placement jig  

Probe Placement Jig

For the most reliable and repeatable coating thickness measurements, making the gauge score highly in repeatability and reproducibility studies. Ideal for small and large components alike. The probe placement jig is supplied with a probe housing to suit standard F1, F2, F4, F5 and N1 probes. Housings to suit other probes are available as optional accessories.

T95012880

Probe Placement Jig

T95013028

Component Hand Vice

T95012888

Cable Release Assembly - ideal for remote measurements

T95015589

N4 Probe Adaptor - must be purchased for use with N4 Probes