
The Elcometer 107 Cross Hatch Cutter for adhesion tests provides an instant assessment of the quality of the bond to the substrate.
Due to its rugged construction this cross hatch gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.
The Elcometer 107 Cross Hatch Cutter for adhesion testing is available as a Basic or Full Kit.
Part Number | Description | Cutter Type | Coating Thickness | Certificate | |
F10713222-1 | Elcometer 107 Basic Kit | 6 x 1mm | 0 - 60µm | 0 - 2.4mils |
ο |
F10713348-6 | Elcometer 107 Full Kit with ISO Tape | 6 x 1mm | 0 - 60µm | 0 - 2.4mils |
ο |
F10713348-1 | Elcometer 107 Full Kit with ASTM Tape | 6 x 1mm | 0 - 50µm | 0 - 2.0mils |
ο |
F10713222-2 | Elcometer 107 Basic Kit | 11 x 1mm | 0 - 50µm | 0 - 2.0mils |
ο |
F10713348-2 | Elcometer 107 Full Kit with ASTM Tape | 11 x 1mm | 0 - 50µm | 0 - 2.0mils |
ο |
F10713222-3 | Elcometer 107 Basic Kit | 11 x 1.5mm | 0 - 90µm1 | 0 - 3.5mils1 |
ο |
F10713222-4 | Elcometer 107 Basic Kit | 6 x 2mm | 50 - 125µm | 2.0 - 5.0mils |
ο |
F10713348-9 | Elcometer 107 Full Kit with ISO Tape | 6 x 2mm | 61 - 120µm | 2.4 - 4.7mils |
ο |
F10713348-4 | Elcometer 107 Full Kit with ASTM Tape | 6 x 2mm | 50 - 125µm | 2.0 - 5.0mils |
ο |
F10713222-5 | Elcometer 107 Basic Kit | 6 x 3mm | 121 - 250µm | 5.0 - 10mils |
ο |
Packing List |
Basic Kit: Robust handle, cutter, hexagonal wrench, presentation storage case and instructions (together with Classification of Adhesion Test Results chart) | ||||
Full Kit: Robust handle, cutter, hexagonal wrench, instructions (together with Classification of Adhesion Test Results chart), magnifier (x6), brush and adhesive tape (either ASTM or ISO tape), all in a plastic ABS carry case |
STANDARDS:
AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038
Standards in grey have been superseded but are still recognised in some industries
1 Approximate Thickness
ο Optional Calibration Certificate available
Methods | ||||
Part Number | Description | ISO | ASTM | Certificate |
T99913700-1 | 6 x 1mm Four sided cutter blade | • |
ο | |
T99913700-2 | 11 x 1mm Four sided cutter blade | • |
ο | |
T99913700-3 | 11 x 1.5mm Four sided cutter blade |
ο | ||
T99913700-4 | 6 x 2mm Four sided cutter blade | • | • |
ο |
T99913700-5 | 6 x 3mm Four sided cutter blade | • |
ο | |
K0001539M001 | Adhesive Tape (1 roll) ASTM D 3359 | • | ||
T9999358-1 | Adhesive Tape (1 roll) ISO 2409 | • | ||
T9998894- | Adhesive Tape (2 rolls) ASTM D 3359 | • | ||
T9999358-2 | Adhesive Tape (2 rolls) ISO 2409 | • |
ο Optional Calibration Certificate available