Elcometer 138/2 Oberflächenverunreinigungstestset
- Schutzbeschichtungen
- Industriebeschichtungen
Zur Gewährleistung der optimalen Qualität und Lebensdauer einer Beschichtung ist es wichtig, vor ihrem Aufbringen den Kontaminationsgrad der zu beschichtenden Oberfläche zu bestimmen.
- Zusammenfassung
-
Zusammenfassung
-
Wird die Beschichtung auf eine schlecht vorbereitete, verunreinigte Oberfläche aufgebracht, kann dies zu ihrem vorzeitigen Versagen, zur kostspieligen Wiederbeschichtung und zu hohen Wartungskosten führen.
Das Elcometer 138/2 Oberflächenverunreinigungstestset ermöglicht die Prüfung auf unsichtbare Rückstände wie:
• pH
• Chlorid-Ionen
• Eisen
• Salze
-
- Hauptmerkmale
-
Hauptmerkmale
Elcometer 138/2 Oberflächenverunreinigungstestset
Chloride Test Strips
Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service.
The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.
Iron Test Strips
Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.
pH Test Strips
These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example, chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel.
The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet ph Test Strip onto the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. Alkaline surfaces are normally associated with either concrete surfaces that are to be coated or steel re-enforcement bars buried in concrete.
-
- Technische Informationen
-
Technische SpezifikationenElcometer 138/2 Oberflächenverunreinigungstestset
Bestellnummer Beschreibung Zertifikat E138----2 Elcometer 138/2 Oberflächenverunreinigungstestset Messbereich pH: 0 bis 14pH, Eisen: 3, 10, 25, 50, 100, 250, 500mg/l Fe², Chlorid: 30 - 600ppm Cl Abmessungen 300 x 220 x 75mm (11 x 8,6 x 3”) Gewicht 2,1kg (4.62lb) Packliste 100 pH-Teststreifen, 100 Eisenteststreifen, 40 Chloridteststreifen, 50 x Elcometer 135C Bresle Testpflaster, 3 x 5ml (0,17fl oz) Spritzen, 3 Nadeln, 30ml (1fl oz) Kunststoffbecher, Transportkoffer und Bedienungsanleitung ● Certificate of Cleanliness & Test Area available at www.elcometer.com/cert
-
- Verwendbar gemäß
-
Verwendbar gemäßElcometer 138/2 Oberflächenverunreinigungstestset
AS 3894.6-A, AS 3894.6-D, SSPC Guide 15
-
- Downloads
-
Downloads
- Bestellnummer
-
BestellnummerElcometer 138/2 OberflächenverunreinigungstestsetNo data found!!
-
Elcometer 138/2 Oberflächenverunreinigungstestset
- Bestellnummer : E138----2
- Zubehör
-
ZubehörElcometer 138/2 Oberflächenverunreinigungstestset
-
Bestellnummer: E135----C25
-
Bestellnummer: E135----C100
-
Bestellnummer: T13820562
-
Bestellnummer: T13820564
-
Bestellnummer: T13820563
-
Bestellnummer: T13818517
-
Bestellnummer: T13818518
-
Bestellnummer: T13818519
-
Bestellnummer: T13827259
-
-
- Home
- Beschichtungskontrolle
- Beschichtungskontrolle
- Inspektionssets
- Elcometer 138/2 Oberflächenverunreinigungstestset
Elcometer 138/2 Oberflächenverunreinigungstestset
- Schutzbeschichtungen
- Industriebeschichtungen
Zur Gewährleistung der optimalen Qualität und Lebensdauer einer Beschichtung ist es wichtig, vor ihrem Aufbringen den Kontaminationsgrad der zu beschichtenden Oberfläche zu bestimmen.
Zusammenfassung
Elcometer 138/2 Oberflächenverunreinigungstestset
Wird die Beschichtung auf eine schlecht vorbereitete, verunreinigte Oberfläche aufgebracht, kann dies zu ihrem vorzeitigen Versagen, zur kostspieligen Wiederbeschichtung und zu hohen Wartungskosten führen.
Das Elcometer 138/2 Oberflächenverunreinigungstestset ermöglicht die Prüfung auf unsichtbare Rückstände wie:
• pH
• Chlorid-Ionen
• Eisen
• SalzeHauptmerkmale
Elcometer 138/2 Oberflächenverunreinigungstestset
Chloride Test Strips
Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service.
The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.
Iron Test Strips
Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.
pH Test Strips
These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example, chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel.
The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet ph Test Strip onto the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. Alkaline surfaces are normally associated with either concrete surfaces that are to be coated or steel re-enforcement bars buried in concrete.
Technische SpezifikationenElcometer 138/2 OberflächenverunreinigungstestsetBestellnummer Beschreibung Zertifikat E138----2 Elcometer 138/2 Oberflächenverunreinigungstestset Messbereich pH: 0 bis 14pH, Eisen: 3, 10, 25, 50, 100, 250, 500mg/l Fe², Chlorid: 30 - 600ppm Cl Abmessungen 300 x 220 x 75mm (11 x 8,6 x 3”) Gewicht 2,1kg (4.62lb) Packliste 100 pH-Teststreifen, 100 Eisenteststreifen, 40 Chloridteststreifen, 50 x Elcometer 135C Bresle Testpflaster, 3 x 5ml (0,17fl oz) Spritzen, 3 Nadeln, 30ml (1fl oz) Kunststoffbecher, Transportkoffer und Bedienungsanleitung ● Certificate of Cleanliness & Test Area available at www.elcometer.com/certVerwendbar gemäßElcometer 138/2 OberflächenverunreinigungstestsetAS 3894.6-A, AS 3894.6-D, SSPC Guide 15
BestellnummerElcometer 138/2 OberflächenverunreinigungstestsetNo data found!!-
Elcometer 138/2 Oberflächenverunreinigungstestset
- Bestellnummer : E138----2
ZubehörElcometer 138/2 Oberflächenverunreinigungstestset-
Bestellnummer: E135----C25
-
Bestellnummer: E135----C100
-
Bestellnummer: T13820562
-
Bestellnummer: T13820564
-
Bestellnummer: T13820563
-
Bestellnummer: T13818517
-
Bestellnummer: T13818518
-
Bestellnummer: T13818519
-
Bestellnummer: T13827259
- Bestellnummer
-