Produktbeschreibung
Technische Spezifikationen
Zubehör
BedienungsanleitungDatenblatt
Videos

Elcometer 106 Haftfestigkeitsprüfer

Dieses leicht bedienbare und tragbare Haftfestigkeitsprüfgerät Typ II zeigt einen numerischen Haftfestigkeitswert an. Zu den Anwendungsbereichen zählen Lackierungen und Plasmaspray auf Brücken, Beschichtungen auf Stahl, Aluminium, Beton usw.

  • Inklusive Transportkoffer - ideal für den mobilen Einsatz
  • Handbetrieb - keine Stromversorgung erforderlich
  • Inklusive Messer für Prüfungen nach EN13144 und ISO 4624

Prüfverfahren

Ein Stempel wird auf die Beschichtung aufgeklebt. Die Federmechanik im Elcometer 106 übt eine Zugkraft auf den Stempel aus.

Beim Abziehen des Stempels von der Oberfläche zeigt die Skala die zum Abziehen des Stempels benötigte Kraft an.

Zur Bestimmung der Haftfestigkeit muss die Stempelfläche inspiziert werden.

Elcometer 106 Haftfestigkeitsprüfer
Elcometer 106 Haftfestigkeitsprüfer

Technische Spezifikationen

Bestellnummer Beschreibung Bereich
MPa (N/mm2) kg/cm2 psi Zertifikat
F106----5 Elcometer 106 Haftfestigkeitsprüfer - Skala 5 0 - 0.2 0 - 2 0 - 30 ο
F106----1 Elcometer 106 Haftfestigkeitsprüfer - Skala 1 0 - 3.5 0 - 35 0 - 500 ο
F106----2 Elcometer 106 Haftfestigkeitsprüfer - Skala 2 0 - 7.0 0 - 70 0 - 1000 ο
F106----3 Elcometer 106 Haftfestigkeitsprüfer - Skala 3 0 - 15 0 - 150 0 - 2000 ο
F106----4 Elcometer 106 Haftfestigkeitsprüfer - Skala 4 0 -22 0 - 220 0 - 3200 ο
Abmessungen Skalen 1, 2, 5:152 x 76 mm (6 x 3")    Skalen 3 und 4:150 mm
Stempeldurch-messer 20mm (0.76”)
Stempelfläche 314mm² (0.49 Quadratzoll)
Bruttogewicht des Sets Skala 1, 2 und 5: 2,8 kg (6,2 lb)   Skala 3: 4,2 kg (9,3 lb)   Skala 4: 4,5 kg (9,9 lb)
Packliste Elcometer 106 Haftfestigkeitsprüfer, 20 Stempel, Araldite Kleber, Supportring,
Magnetstempelklemme, Stempelmesser, Ratschenschlüssel (nur Skala 3 und 4), Transportkoffer und Bedienungsanleitung


Verwendbar gemäß:
AS 1580.408.5, ASTM D 4541, AS/NZS 1580.408.5, EN 13144, EN 24624, ISO 4624, ISO 16276-1, JIS K 5600-5-7, NF T30-062, NF T30-606

Standards in Grau ersetzt worden, aber noch in einigen Branchen anerkannt

  Kalibrierzertifikat optional erhältlich

Zubehör

T1062895-10 Ersatzstempel, Durchmesser 20 mm (0,76”) (10er-Pack)
T1062895- Ersatzstempel, Durchmesser 20 mm (0,76”) (100er-Pack)
T1062914- Große Stempel, Durchmesser 40 mm (1,52”) (5er-Pack)
T1062915- Großer Stützring für 40mm (1,52”) Stempel
T99912906

Standard Araldite 2 Komponenten Epoxidkleber, 2 x 15ml Tube

T99914009 20 mm (0,76”) Stempel-Schneidwerkzeug

Videos

1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

VERWANDTE VIDEOS

1. An Introduction to Pull-Off Adhesion on Coated Surfaces
1. An Introduction to Pull-Off Adhesion on Coated Surfaces

Adhesion testers are used to test how well a coating has adhered to a surface, as poor adhesion can lead to premature coating failures. The coating inspector has essentially three main methods to choose from - cross hatch, push off, and the most common, the pull-off adhesion test.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/rBTGaP-OXLM
2. Selecting the Dolly Diameter and Gauge
2. Selecting the Dolly Diameter and Gauge

When it comes to selecting the dolly diameter and adhesion gauge type to use for a pull-off adhesion test; factors such as the substrate material, the substrate shape, and the expected coating strength will affect the dolly or gauge the user chooses.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/NskjSM8n5UY
3. Selecting the most Appropriate Position for an Adhesion Test
3. Selecting the most Appropriate Position for an Adhesion Test

When preparing a pull-off adhesion test, whilst the actual location and the number of pulls is typically defined by the test method or procedure that’s being followed, the actual positioning of the dolly is vital, as poor positions can result in low pull-off values or invalid tests.


 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here. 

To download the video script in English click here.

 

//www.youtube.com/embed/7xmYIfozQaw
4. Preparing the Dolly and the Coating
4. Preparing the Dolly and the Coating

Properly preparing the dolly and the surface before performing a pull-off adhesion test will help achieve higher pull-off values.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/-26j4aoiFe8
5. To Cut or Not to Cut?
5. To Cut or Not to Cut?

Should the coating around a dolly be cut, or left uncut prior to a pull-off adhesion test; and whose decision is it to make?

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

//www.youtube.com/embed/ZqSNwQSOPqA
6. The Pull-Off Test
6. The Pull-Off Test

Once the glue between a properly prepared dolly or pull stub and a properly prepared coating has fully cured, the pull-off adhesion test can be undertaken using the adhesion tester of choice.

 

This video is part of a series on Pull-Off Adhesion Testing, to see the next video please click here.

To download the video script in English click here.

 

//www.youtube.com/embed/4rjUgA2Lwos
7. Assessing the Result; Glue, Adhesive and Cohesive Failures
7. Assessing the Result; Glue, Adhesive and Cohesive Failures

Once the pull-off adhesion test has been completed the tensile pull-off force, whether the coating was coat or not, the dolly size and gauge type, and the failure mode of the coating are all recorded; with the nature of the failure usually recorded as an estimated percentage to the nearest 10%.

 

This video is part of a series on Pull-Off Adhension Testing, to view the playlist please click here.


To download the video script in English click here.

//www.youtube.com/embed/TuFY8_KI9lQ
<P> 8. Measuring the Pull-Off Adhesion of Coatings on Concrete</P>

 8. Measuring the Pull-Off Adhesion of Coatings on Concrete

Testing coating adhesion on concrete substrates using a pull-off adhesion gauge is similar to testing coatings on metal substrates. However, there are a number of differences in the test procedures and equipment used.


This video is part of a series on Pull-Off Adhension Testing, to view the series playlist please click here.


To download the video in script in English click here.

//www.youtube.com/embed/O0wMikGLi84