Elcometer Bolt Tension Monitor Transducers

Transducer-Intro

Elcometer Bolt Tension Transducers

  • Summary
    • Summary

    • The BG80TDL Bolt Tension Monitor measures the change in length of a fastener when a load is applied to the fastener.

      Within the elastic limit of the fastener, the change of length is proportional to the load applied, and therefore by measuring the change of length and knowing the physical properties of the fastener, the load on the fastener can be calculated.

  • Technical Information
    • Technical Specification
      Elcometer Bolt Tension Monitor Transducers
      Elcometer 2.25MHz Bolt Tension Monitor Transducer
      Part Number TX2M25CM-5
      Probe Diameter 1/4"
      Element Type Si/El Non-Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX2M25CM-6
      Probe Diameter 1/4"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX2M25DM
      Probe Diameter 3/8"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX2M25EM-5
      Probe Diameter 1/2"
      Element Type Si/El Non-Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX2M25EM-6
      Probe Diameter 1/2"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX2M25GM
      Probe Diameter 3/4”
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Elcometer 5.00MHz Bolt Tension Monitor Transducer
      Part Number TX5M00AM-2
      Probe Diameter 1/8"
      Element Type Si/El Non-Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX5M00AM-3
      Probe Diameter 1/8"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX5M00CM-8
      Probe Diameter 1/4"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX5M00DM
      Probe Diameter 3/8"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX5M00GM
      Probe Diameter 3/4”
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX5M00EM-6
      Probe Diameter 1/2"
      Element Type Si/El Non-Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX5M00EM-7
      Probe Diameter 1/2"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Elcometer 10.00MHz Bolt Tension Monitor Transducer
      Part Number TX10M0AM-2
      Probe Diameter 1/8"
      Element Type Si/El Non-Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX10M0AM-3
      Probe Diameter 1/8"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
      Part Number TX10M0CM-5
      Probe Diameter 1/4"
      Element Type Si/El Magnetic
      Probe Characteristic Standard
      Connector Type
      Damping* S
      Potted  
      Microdot
      Lemo  
      Top
      Side  
      End  
      Suitable for measuring
      All Metals
      Rough Surfaces  
      Castings  
      Billets  
      Extruded Parts  
      Weld Inspection  
      Weld Inspection (Tight Areas)  
      Immersion & Bubbler Inspections  
      Suitable for
      BG80DL
      BG80TDL
       
        Part Number Probe Diameter

      Element Type

      Probe Characteristic
      Connector Type Suitable for measuring Suitable for

      Damping*

      Potted

      Microdot

      Lemo

      Top

      Side

      End

      All Metals

      Rough Surfaces

      Castings

      Billets

      Extruded Parts

      Weld Inspection

      Weld Inspection (Tight Areas)

      Immersion & Bubbler Inspections

      BG80DL

      BG80TDL

      Elcometer 2.25MHz Bolt Tension Monitor Transducer
        TX2M25CM-5 1/4" Si/El Non-Magnetic Standard
      S  
       
         
                   
        TX2M25CM-6 1/4" Si/El Magnetic Standard
      S  
       
         
                   
        TX2M25DM 3/8" Si/El Magnetic Standard
      S  
       
         
                   
        TX2M25EM-5 1/2" Si/El Non-Magnetic Standard
      S  
       
         
                   
        TX2M25EM-6 1/2" Si/El Magnetic Standard
      S  
       
         
                   
        TX2M25GM 3/4” Si/El Magnetic Standard
      S  
       
         
                   
      Elcometer 5.00MHz Bolt Tension Monitor Transducer
        TX5M00AM-2 1/8" Si/El Non-Magnetic Standard
      S  
       
         
                   
        TX5M00AM-3 1/8" Si/El Magnetic Standard
      S  
       
         
                   
        TX5M00CM-8 1/4" Si/El Magnetic Standard
      S  
       
         
                   
        TX5M00DM 3/8" Si/El Magnetic Standard
      S  
       
         
                   
        TX5M00GM 3/4” Si/El Magnetic Standard
      S  
       
         
                   
        TX5M00EM-6 1/2" Si/El Non-Magnetic Standard
      S  
       
         
                   
        TX5M00EM-7 1/2" Si/El Magnetic Standard
      S  
       
         
                   
      Elcometer 10.00MHz Bolt Tension Monitor Transducer
        TX10M0AM-2 1/8" Si/El Non-Magnetic Standard
      S  
       
         
                   
        TX10M0AM-3 1/8" Si/El Magnetic Standard
      S  
       
         
                   
        TX10M0CM-5 1/4" Si/El Magnetic Standard
      S  
       
         
                   
      *S - Standard Undamped Transducer
  • Part Numbers
    • Part Numbers
      Elcometer Bolt Tension Monitor Transducers
      • Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer
        • Frequency: 2.25MHz
        • Probe Diameter: 1/4"
        • Element Type: Si/El Non-Magnetic
        • Part Number : TX2M25CM-5
      • Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer
        • Frequency: 2.25MHz
        • Probe Diameter: 1/4"
        • Element Type: Si/El Magnetic
        • Part Number : TX2M25CM-6
      • Elcometer 2.25MHz 3/8" Bolt Tension Monitor Transducer
        • Frequency: 2.25MHz
        • Probe Diameter: 3/8"
        • Element Type: Si/El Magnetic
        • Part Number : TX2M25DM
      • Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer
        • Frequency: 2.25MHz
        • Probe Diameter: 1/2"
        • Element Type: Si/El Non-Magnetic
        • Part Number : TX2M25EM-5
      • Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer
        • Frequency: 2.25MHz
        • Probe Diameter: 1/2"
        • Element Type: Si/El Magnetic
        • Part Number : TX2M25EM-6
      • Elcometer 2.25MHz 3/4" Bolt Tension Monitor Transducer
        • Frequency: 2.25MHz
        • Probe Diameter: 3/4”
        • Element Type: Si/El Magnetic
        • Part Number : TX2M25GM
      • Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 1/8"
        • Element Type: Si/El Non-Magnetic
        • Part Number : TX5M00AM-2
      • Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 1/8"
        • Element Type: Si/El Magnetic
        • Part Number : TX5M00AM-3
      • Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 1/4"
        • Element Type: Si/El Non-Magnetic
        • Part Number : TX5M00CM-7
      • Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 1/4"
        • Element Type: Si/El Magnetic
        • Part Number : TX5M00CM-8
      • Elcometer 5.00MHz 3/8" Bolt Tension Monitor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 3/8"
        • Element Type: Si/El Magnetic
        • Part Number : TX5M00DM
      • Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 1/2"
        • Element Type: Si/El Magnetic
        • Part Number : TX5M00EM-7
      • Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 1/2"
        • Element Type: Si/El Non-Magnetic
        • Part Number : TX5M00EM-6
      • Elcometer 5.00MHz 3/4" Bolt Tension Montor Transducer
        • Frequency: 5.00MHz
        • Probe Diameter: 3/4”
        • Element Type: Si/El Magnetic
        • Part Number : TX5M00GM
      • Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers
        • Frequency: 10.00MHz
        • Probe Diameter: 1/8"
        • Element Type: Si/El Non-Magnetic
        • Part Number : TX10M0AM-2
      • Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers
        • Frequency: 10.00MHz
        • Probe Diameter: 1/8"
        • Element Type: Si/El Magnetic
        • Part Number : TX10M0AM-3
      • Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers
        • Frequency: 10.00MHz
        • Probe Diameter: 1/4"
        • Element Type: Si/El Non-Magnetic
        • Part Number : TX10M0CM-4
      • Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers
        • Frequency: 10.00MHz
        • Probe Diameter: 1/4"
        • Element Type: Si/El Magnetic
        • Part Number : TX10M0CM-5
      • Calibration Bar 3" 4140
        • Part Number : TW-24029-S1
      • Calibration Bar, 3” and 6”, Steel 4140
        • Part Number : TW-24029-S2

Elcometer Bolt Tension Monitor Transducers

Transducer-Intro

Elcometer Bolt Tension Transducers

Summary

Elcometer Bolt Tension Monitor Transducers

The BG80TDL Bolt Tension Monitor measures the change in length of a fastener when a load is applied to the fastener.

Within the elastic limit of the fastener, the change of length is proportional to the load applied, and therefore by measuring the change of length and knowing the physical properties of the fastener, the load on the fastener can be calculated.

Technical Specification
Elcometer Bolt Tension Monitor Transducers
Elcometer 2.25MHz Bolt Tension Monitor Transducer
Part Number TX2M25CM-5
Probe Diameter 1/4"
Element Type Si/El Non-Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX2M25CM-6
Probe Diameter 1/4"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX2M25DM
Probe Diameter 3/8"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX2M25EM-5
Probe Diameter 1/2"
Element Type Si/El Non-Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX2M25EM-6
Probe Diameter 1/2"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX2M25GM
Probe Diameter 3/4”
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Elcometer 5.00MHz Bolt Tension Monitor Transducer
Part Number TX5M00AM-2
Probe Diameter 1/8"
Element Type Si/El Non-Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX5M00AM-3
Probe Diameter 1/8"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX5M00CM-8
Probe Diameter 1/4"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX5M00DM
Probe Diameter 3/8"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX5M00GM
Probe Diameter 3/4”
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX5M00EM-6
Probe Diameter 1/2"
Element Type Si/El Non-Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX5M00EM-7
Probe Diameter 1/2"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Elcometer 10.00MHz Bolt Tension Monitor Transducer
Part Number TX10M0AM-2
Probe Diameter 1/8"
Element Type Si/El Non-Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX10M0AM-3
Probe Diameter 1/8"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
Part Number TX10M0CM-5
Probe Diameter 1/4"
Element Type Si/El Magnetic
Probe Characteristic Standard
Connector Type
Damping* S
Potted  
Microdot
Lemo  
Top
Side  
End  
Suitable for measuring
All Metals
Rough Surfaces  
Castings  
Billets  
Extruded Parts  
Weld Inspection  
Weld Inspection (Tight Areas)  
Immersion & Bubbler Inspections  
Suitable for
BG80DL
BG80TDL
 
  Part Number Probe Diameter

Element Type

Probe Characteristic
Connector Type Suitable for measuring Suitable for

Damping*

Potted

Microdot

Lemo

Top

Side

End

All Metals

Rough Surfaces

Castings

Billets

Extruded Parts

Weld Inspection

Weld Inspection (Tight Areas)

Immersion & Bubbler Inspections

BG80DL

BG80TDL

Elcometer 2.25MHz Bolt Tension Monitor Transducer
  TX2M25CM-5 1/4" Si/El Non-Magnetic Standard
S  
 
   
             
  TX2M25CM-6 1/4" Si/El Magnetic Standard
S  
 
   
             
  TX2M25DM 3/8" Si/El Magnetic Standard
S  
 
   
             
  TX2M25EM-5 1/2" Si/El Non-Magnetic Standard
S  
 
   
             
  TX2M25EM-6 1/2" Si/El Magnetic Standard
S  
 
   
             
  TX2M25GM 3/4” Si/El Magnetic Standard
S  
 
   
             
Elcometer 5.00MHz Bolt Tension Monitor Transducer
  TX5M00AM-2 1/8" Si/El Non-Magnetic Standard
S  
 
   
             
  TX5M00AM-3 1/8" Si/El Magnetic Standard
S  
 
   
             
  TX5M00CM-8 1/4" Si/El Magnetic Standard
S  
 
   
             
  TX5M00DM 3/8" Si/El Magnetic Standard
S  
 
   
             
  TX5M00GM 3/4” Si/El Magnetic Standard
S  
 
   
             
  TX5M00EM-6 1/2" Si/El Non-Magnetic Standard
S  
 
   
             
  TX5M00EM-7 1/2" Si/El Magnetic Standard
S  
 
   
             
Elcometer 10.00MHz Bolt Tension Monitor Transducer
  TX10M0AM-2 1/8" Si/El Non-Magnetic Standard
S  
 
   
             
  TX10M0AM-3 1/8" Si/El Magnetic Standard
S  
 
   
             
  TX10M0CM-5 1/4" Si/El Magnetic Standard
S  
 
   
             
*S - Standard Undamped Transducer
Part Numbers
Elcometer Bolt Tension Monitor Transducers
  • Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer
    • Frequency: 2.25MHz
    • Probe Diameter: 1/4"
    • Element Type: Si/El Non-Magnetic
    • Part Number : TX2M25CM-5
  • Elcometer 2.25MHz 1/4" Bolt Tension Monitor Transducer
    • Frequency: 2.25MHz
    • Probe Diameter: 1/4"
    • Element Type: Si/El Magnetic
    • Part Number : TX2M25CM-6
  • Elcometer 2.25MHz 3/8" Bolt Tension Monitor Transducer
    • Frequency: 2.25MHz
    • Probe Diameter: 3/8"
    • Element Type: Si/El Magnetic
    • Part Number : TX2M25DM
  • Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer
    • Frequency: 2.25MHz
    • Probe Diameter: 1/2"
    • Element Type: Si/El Non-Magnetic
    • Part Number : TX2M25EM-5
  • Elcometer 2.25MHz 1/2" Bolt Tension Monitor Transducer
    • Frequency: 2.25MHz
    • Probe Diameter: 1/2"
    • Element Type: Si/El Magnetic
    • Part Number : TX2M25EM-6
  • Elcometer 2.25MHz 3/4" Bolt Tension Monitor Transducer
    • Frequency: 2.25MHz
    • Probe Diameter: 3/4”
    • Element Type: Si/El Magnetic
    • Part Number : TX2M25GM
  • Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 1/8"
    • Element Type: Si/El Non-Magnetic
    • Part Number : TX5M00AM-2
  • Elcometer 5.00MHz 1/8" Bolt Tension Monitor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 1/8"
    • Element Type: Si/El Magnetic
    • Part Number : TX5M00AM-3
  • Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 1/4"
    • Element Type: Si/El Non-Magnetic
    • Part Number : TX5M00CM-7
  • Elcometer 5.00MHz 1/4" Bolt Tension Monitor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 1/4"
    • Element Type: Si/El Magnetic
    • Part Number : TX5M00CM-8
  • Elcometer 5.00MHz 3/8" Bolt Tension Monitor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 3/8"
    • Element Type: Si/El Magnetic
    • Part Number : TX5M00DM
  • Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 1/2"
    • Element Type: Si/El Magnetic
    • Part Number : TX5M00EM-7
  • Elcometer 5.00MHz 1/2" Bolt Tension Monitor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 1/2"
    • Element Type: Si/El Non-Magnetic
    • Part Number : TX5M00EM-6
  • Elcometer 5.00MHz 3/4" Bolt Tension Montor Transducer
    • Frequency: 5.00MHz
    • Probe Diameter: 3/4”
    • Element Type: Si/El Magnetic
    • Part Number : TX5M00GM
  • Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers
    • Frequency: 10.00MHz
    • Probe Diameter: 1/8"
    • Element Type: Si/El Non-Magnetic
    • Part Number : TX10M0AM-2
  • Elcometer 10.00MHz 1/8" Bolt Tension Monitor Transducers
    • Frequency: 10.00MHz
    • Probe Diameter: 1/8"
    • Element Type: Si/El Magnetic
    • Part Number : TX10M0AM-3
  • Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers
    • Frequency: 10.00MHz
    • Probe Diameter: 1/4"
    • Element Type: Si/El Non-Magnetic
    • Part Number : TX10M0CM-4
  • Elcometer 10.00MHz 1/4" Bolt Tension Monitor Transducers
    • Frequency: 10.00MHz
    • Probe Diameter: 1/4"
    • Element Type: Si/El Magnetic
    • Part Number : TX10M0CM-5
  • Calibration Bar 3" 4140
    • Part Number : TW-24029-S1
  • Calibration Bar, 3” and 6”, Steel 4140
    • Part Number : TW-24029-S2