Elcometer Automotive Inspection Kits

These kits have been specifically designed with the automotive aftermarket in mind including Insurance Assessors, Third Party Consultants, Body Shops and Used Car Sales. They contain all the products required to provide instant measurements of the coating thickness on both steel and aluminium car panels allowing the user to asses rework and provide information for valuation.

Elcometer Marine Inspection Kits

The International Maritime Organisation (IMO) regulation for the Performance Standard for Protective Coatings (PSPC) for Salt Water Ballast Tanks, resolutions MSC.215(82) and MSC.216(82), effective from 1st July 2008 for new ship builds, brings with it a number of challenges for the Marine Coatings Inspector. The IMO regulation not only stipulates a rigorous dry film thickness verification regime, but also requires the inspection of surface profile and cleanliness, together with the recording of temperature, relative humidity and dewpoint at each stage of the build process. Available in two versions, Standard and Top, the Elcometer Marine Inspection Kits have been specifically designed for this purpose and contain all the equipment required by the Marine Coatings Inspector to test and monitor all the parameters stipulated in the new IMO regulation.

Elcometer Powder Inspection Kit

To cover all eventualities in the powder inspection process, Elcometer has produced a kit to enable the inspection of powder coatings on all surfaces.

Elcometer Protective Coatings Inspection Kits

The Elcometer range of Protective Coatings Inspection Kits provide all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity and both wet and dry film thickness. All three kits are available as metric or imperial kits, with or without and Elcometer 456 Digital Coating Thickness Gauge and are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Elcometer 138 Bresle Conductivity Kit for Salt Contamination

This simple kit is used to measure the level of contaminants on a surface. Supplied with a conductivity meter and bresle patches for 25 tests, this is a required kit on many sites around the world.

Elcometer 134 CSN Kit - Chloride, Sulphate & Nitrate Ions Contamination Kit

Designed to accurately measure the individual concentration of chlorides, sulphates and nitrates on the job site, this kit is an easy to use kit allowing the user to measure the levels of chlorides, sulphates and nitrates from sample.