dry film thickness by elcometer

coating thickness - destructive

Destructive thickness measurement is often the only guaranteed method available to test certain coating/substrate combinations including:

• Paint applied to concrete, wood, plaster, plastic, etc.

When it is necessary to measure the individual layer thickness in a multiple-layer coating system, the most accurate method available is the Paint Inspection Gauge (P.I.G.) coating thickness gauge.

Please click on the appropriate image or image title to view the product details

		Elcometer 141 Paint Inspection Gauge The Elcometer 141 paint inspection gauge (PIG) is a quick, versatile method of examination and measurement of coatings in a portable, easy to use instrument. Ergonomically designed to give a balanced weight distribution for a more consistent cut - even on thick and hard coatings.
		Elcometer 121/3 Universal Paint Inspection Gauge The Elcometer 121/3 Universal Paint Inspection Gauge (P.I.G) provides a quick, versatile method of coating examination and destructive measurement of coating thickness and cross hatch adhesion in a portable, easy-to-use gauge. The gauge can be used on single or multiple coats on virtually all substrates including wood, plastics and metal.
		Elcometer 195 Säberg Drill Whereas a Paint Inspection Gauge (P.I.G.) makes a linear cut along the coating, the Elcometer 195 Säberg Drill makes a small hole in order to measure the coating thickness layer thus much less damage is done - minimising the area that is not covered by the coatings guarantee.
		Elcometer 126 & 3240 Dry and Wet Film Gauges These easy to use gauges are designed to measure both the Dry Film and the Wet Film thickness of a coating.

www.elcometer.com