accessories

RS232 - USB CABLE ACCESSORY

You can now connect your multiplexer to the PC via the hot pluggable USB port and keep your serial port free for other equipment such as digital cameras, modems, barcode scanners, PDA Organiser (also Palm V), etc.

Hot pluggable Software on CD For Windows 98/2000/ME, including user manual, are also supplied allowing instant use.

JUMBO HAND GRIP

Ideal for precision placement for the most accurate results on flat and curved surfaces.Simply place the probe inside the Jumbo Hand Grip and take measurements.

The Jumbo Hand Grip can be used with the following probes:

• F1 Standard; F2 Standard; F4 Standard; F5 Rebar; N1 Standard; N4 Standard; FNF Standard

V-PROBE ADAPTOR

Ideal for precision placement for the most accurate results on large diameter curved surfaces such as pipes and cylinders. Simply place the probe inside the V-Probe and start taking measurements.

The V-Probe Adapter can be used with the following probes:

• F1 Standard; F2 Standard; F4 Standard; F5 Rebar; N1 Standard; N4 Standard; FNF Standard

SOFT MATERIAL / BLANKET PROBE

Ideal for taking precision readings on soft coatings or print blankets. The wide, flat base design acts as a load spreader, reducing the total force at a single point.

data sheet

PROBE PLACEMENT JIG

For the most reliable and repeatable coating thickness measurements, making the gauge the score highly in repeatability and reproducibility studies. Ideal for small and large components alike.

The Probe Placement Jig can be used with the following probes:

• F1 Standard; F2 Standard; F4 Standard; F5 Rebar; N1 Standard; N4 Standard; FNF Standard, Miniature Probes

INFRARED PRINTER

This printer has been specifically selected for gauges which have IR output. The battery operated unit is an ideal choice for printing out individual readings and statistical information - without using a cable.

The Elcometer Infrared Printer can be used with the following gauges with IR output:

• Elcometer 215                        
• Elcometer 345           

ELCOMETER DOT MATRIX MINI PRINTER

This serial & parallel portable printer has an internal rechargeable battery and can accept a signal from all Elcometer Gauges with a cable output. Using a cable allows the user to be confident that all data stored in the gauge will be printed, without loss or interruption.

This Dot Matrix Printer can be used with the following instruments with cable data output:

• Elcometer 206           Elcometer 223           Elcometer 345           
• Elcometer 355           Elcometer 456