accessories

Elcometer Home Page

 

 

Elcometer 236 DC Holiday Detector

 

ELCOMETER 236 PROBE ACCESSORIES
The Elcometer 236 has a wide range of accessories and adaptors to allow you to test wherever you are.  If you do not see the accessory that you require, please contact Elcometer.

 

TELESCOPIC PROBE HANDLE
Glass fibre, fully insulated behind the ring, this low cost telescopic probe handle has been designed to allow the user to reach high areas from the ground or a platform. Using a simple twist and lock procedure the user can extend the handle to any length between the minimum and maximum.
Description
Part Number
Telescopic Probe Handle 0.6 – 1.2m (24 - 47")
T236155971
Telescopic Probe Handle 1.8 – 3.6m (71 - 142")
T236155972

 

EXTENSION PIECES
To extend the probe for applications where a long reach is required, ideal for internal pipe inspection. Screw in the two pieces into the coupling piece and extend as far as you need to.
Description
Part Number
Probe Extension Piece 250mm (9.8”)
T2362663A
Probe Extension Piece 500mm (19.7”)
T2362663B
Probe Extension Piece 1000mm (39.4”)
T2362663C
Coupling Piece – to link to Extension Pieces together
T2362666-

 

BAND BRUSH PROBE
Provided as standard when an Elcometer 236 is purchaced, it is an ideal accessory for complex shapes, small products and for accessing drill holes, eyes, etc
Description
Part Number
Band Brush Probe
T2362669-

 

RIGHT ANGLE WIRE BRUSH PROBES
Manufactured out of  Phosphor Bronze these wire brush probes are ideal for testing large, flat surfaces. A range of widths are available.
Description
Part Number
Right Angle Wire Brush Probe - 250mm (9.8”)
T23638071
Right Angle Wire Brush Probe - 500mm (19.7”)
T23638072
Right Angle Wire Brush Probe - 1000mm (39.4”)
T23638073
Replacement Wire Brush – Electrode Only - 250mm (9.8”)
T99926621
Replacement Wire Brush – Electrode Only - 500mm (19.7”)
T99926622
Replacement Wire Brush – Electrode Only - 100mm (39.4”)
T99926623

 

RIGHT ANGLE CARBON INFUSED RUBBER PROBES
Ideal for testing large, flat surfaces with either thin or delicate coatings. A range of widths are available.
Description
Part Number
Right Angle Rubber Probe - 250mm (9.8”)
T23638081
Right Angle Rubber Probe - 500mm (19.7”)
T23638082
Right Angle Rubber Probe - 1000mm (39.4”)
T23638083
Right Angle Rubber Probe - 1400mm (55.1”)
T23638084
Replacement Rubber  – Electrode Only - 250mm (9.8”)
T99926731
Replacement Rubber – Electrode Only - 500mm (19.7”)
T99926732
Replacement Rubber – Electrode Only - 1000mm (39.4”)
T99926733
Replacement Rubber – Electrode Only - 1400mm (55.1”)
T99926734

 

EXTERNAL PIPE ROLLING SPRING PROBES
Designed specifically to measure the external diameter of pipes. A range of external diameters are available.
Diameter
Part Number
mm
Inches
Full Assembly Spring, Holder & 250mm Extension Piece
Spring Only
50
2
T2362649A
T9996197A
75
3
T2362649B
T9996197B
100
4
T2362649C
T9996197C
150
6
T2362649D
T9996197D
200
8
T2362649E
T9996197E
250
10
T2362649F
T9996197F
300
12
T2362649G
T9996197G
350
14
T2362649H
T9996197H
400
16
T2362649I
T9996197I
450
18
T2362649J
T9996197J
500
20
T2362649K
T9996197K
600
24
T2362649L
T9996197L
750
30
T2362649M
T9996197M
1000
36
T2362649N
T9996197N

 

INTERNAL PIPE WIRE BRUSH PROBES
Designed specifically to measure the internal diameter of pipes. A range of internal diameters are available.
Diameter
Part Number
mm
Inches
Full Assembly Wire Brush, Holder & 250mm Extension Piece
Brush Only
38
1.5
T2363907A
T9993766-
51
2.0
T2363907B
T9993767-
64
2.5
T2363907C
T9993768-
76
3.0
T2363907D
T9993769-
89
3.5
T2363907E
T9993770-
102
4.0
T2363907F
T9993771-
114
4.5
T2363907G
T9993772-
127
5.0
T2363907H
T9993773-
152
6.0
T2363907I
T9993774-
203
8.0
T2363907J
T9993775-
254
10.0
T2363907K
T9993776-
305
12.0
T2363907L
T9993777-

 

 

EXTERNAL DIAMETER PIPE TESTING KIT

The Elcometer External Diameter Pipe Testing Kit has been created specifically to allow the pipeline inspector to create probes for non standard pipe sizes.

Each kit allows the user to create either 1 external spring for use on a 635mm (25”) diameter pipe, or up to 3 springs of User defined diameters.

Larger diameters can be made by connecting additional spring lengths together.

Spring lengths can be purchased separately using the part numbers listed above.
Description
Part Number
Pipe Testing Kit
T23515579

www.elcometer.com