elcometer.com Elcometer 211 Coating Thickness Gauge


Elcometer 211 Coating Thickness Gauge

Bookmark and Share

Product Description


The Elcometer 211, commonly referred to as the “Banana Gauge”, has proven to be a successful coating thickness gauge where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production.

 

The “V” grooved base, rubber feet and clear scale, with its ranges for thicker coatings, make this one of the most popular mechanical gauges in the world.

  • Factory calibrated - with user calibration adjustment
  • Foils supplied to check calibration on site
  • Ideal for cold surfaces and underwater use
  • Small and portable with an accuracy ±5%
Elcometer 211 Coating Thickness Gauge
Elcometer 211 Coating Thickness Gauge

Technical Specification

Part Number Description Range
A211F--1M Elcometer 211 Coating Thickness Gauge 0 - 1000µm
A211F--8M Elcometer 211 Coating Thickness Gauge 0.65 - 6mm
A211F--1E Elcometer 211 Coating Thickness Gauge 0 - 40mils
A211F--8E Elcometer 211 Coating Thickness Gauge 25 - 250mils
Accuracy ±5% of the reading or ±2.5µm/0.1mil (whichever is the greater)
Substrate Thickness 0.4mm (16mils) minimum
Measurement Area 30mm (1.18”) Diameter minimum
Measurement Diameter 20mm (0.8”) minimum
Edge Effects Must be at least 6mm (0.24”) from edge
Dimensions 200 x 60 x 30mm (7.8 x 2.4 x 1.2”)
Certificate available Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability
Packing List Elcometer 211, calibration foil set, carry pouch, neck harness and operating
instructions

Can be used in accordance with:
AS 2331.1.3, AS 3894.3-A, ASTM G 12, ASTM B 499, AS/NZS 1580.108.1, BS 5411-11, BS 3900-C5-6A, DIN 50981, ISO 2178,
ISO 2808-6A, ISO 2808-7A, JIS K 5600-1-7, NF T 30-124, SSPC-PA2

Standards in grey have been superseded but are still recognised in some industries

Terms & Conditions | Company Policies | ISO Certifications | Press | Sitemap | Copyright | © Elcometer Limited 2013