elcometer.com Elcometer 355 Coating Thickness Gauge


Elcometer 355 Coating Thickness Gauge

Bookmark and Share

Product Description


The Elcometer 355’s watchwords are accuracy, simplicity, versatility and durability making this a true state of the art hand held measuring system packed with time-saving and cost-cutting features.

Available as a standard and top model, the unit’s large memory stores up to 10,000 readings in batches and data can be output to PC, datalogger or printer as required.

With a comprehensive range of Probe Modules available, simply select the most appropriate for the application. All modules are supplied with calibration foils.

  • ±1% or 1µm, whichever is the greater, accuracy
  • Rugged aluminium case designed for the toughest environments
  • ElcoMaster™ 2.0 software supplied.
  • Full statistical analysis - mean standard deviation, number of readings, highest and lowest value
  • RS232 output
  • Date and time stamp

Each gauge is supplied without a probe allowing the choice of the correct probe for the relevant applications.

Elcometer 355 Coating Thickness Gauges
Elcometer 355 Coating Thickness Gauges
Elcometer 355 Standard Coating Thickness Gauge
Elcometer 355 Top Coating Thickness Gauge

Technical Specification

Part Number Description
A355----S Elcometer 355 Standard Coating Thickness Gauge
A355----T Elcometer 355 Top Coating Thickness Gauge
Operating Temperature 0°C to 50°C (32°F to 120°F)
Storage Temperature -10°C to 60°C (14°F to 140°F)
Dimensions 175 x 83 x 42mm (6.9 x 3.3 x 1.6”)
Weight 650g (1.43lb)
Reading Speed 40 readings per minute
Data Output RS232C Serial or Parallel Output via D25 Type Connector (Female)
Memory Standard: 5,000 reading memory in pre-set batches
Top: 10,000 reading memory in up to 200 batches (individually calibrated)
Battery Type 3 x 1.5V AA Cells (Alkaline) or 3 x 1.5V Nickel Metal Hydride rechargeable cells
Battery Life Minimum: 40 hours with alkaline batteries, 20 hours with rechargeable batteries
Certificate available Certificate of Test - for variable calibration equipment and supplied with readings. A Certificate of Inspection states the instrument is tested in accordance with our procedures
Packing List Elcometer 355 Top or Standard Gauge, leather carry case, 3 x AA batteries, ElcoMaster™ software, PC cable and operating instructions

Can be used in accordance with:

AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 244, ASTM B 499, ASTM D 1186-B, ASTM D 1400,
ASTM D 7091, ASTM E 376, ASTM G 12,
BS 3900-C5-6A, BS 3900-C5-6B, BS 5411-3, BS 5411-11, BS 5599,
DIN 50981, DIN 50984, ECCA T1,
EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840,
ISO 2063, ISO 2360,
ISO 2808-6A, ISO 2808-6B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 2808-12,
JIS K 5600-1-7, NF A49-211, NF T30-124,
SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

The Standards in grey have been superseded but are still recognised in some industries

Certificate of Test - for variable calibration equipment and supplied with readings. A Certificate of Inspection states the instrument is tested in accordance with our procedures

Accessories

Elcometer 355 Ferrous and Non-Ferrous Probes

Unique probe modules allow the Elcometer 355 Standard Coating Thickness Gauges to be versatile and flexible for any measurement application.

Probe modules can be freely interchanged as required for both ferrous (F) and non-ferrous (N) metal substrates.

Most probe modules are capable of an accuracy of ±1% of the reading on a variety of coatings and surfaces.

Telescopic probes extend from 410mm (16”) to 1100mm (43”).

 

Part Number & Description Measuring Range Accuracy Range Steps
Resolution

T35511952

F1 Standard

t3551152 rgb

0-1500µm
(0-60mils)
±1% or ±1µm
(±0.04mil)
0-200µm (0-8mils)
200-500µm (8-20mils)
500-1500µm (20-60mils)
0.1µm (0.005mil)
0.5µm (0.02mil)
1.0µm (0.05mil)

T35511953

F1 Right Angle

t3551153 rgb

T35511959

F1 Telescopic

t35511959 rgb

T35512400

F1A (Automotive)

t35512400 rgb

T35511954

F2 Standard

t35511954 rgb

0-5mm (0-200mils)

±1% or ±5µm
(±0.2mil)
0-500µm (0-20mils)
500-5000µm (20-200mils)
2µm (0.1mil)
5µm (0.2mil)

T35511955

F2 Right Angle

t35511955 rgb

T35511960

F2 Telescopic

t35511960 rgb

T35511956

F3 Standard

t35511956 rgb 0-13mm
(0-500mils)
±2% or ±30µm
(±1mil)
0-1000µm (0-40mils)
1-13000µm (40-1500mils)
5µm (0.2mil)
10µm (0.5mil)

T35511950

F4 Standard

t35511950 rgb 0-250µm
(0-10mils)
±1% or ±1µm
(±0.04mil)
0-250µm (0-10mils) 0.1µm (0.005mil)

T35511951

F4 Right Angle
(long)

t35511951 rgb

T35513511

F4 Right Angle
(short)

t35513511 rgb

T35511962

F5 (Rebar)

t35511962 rgb 0-800µm
(0-32mils)
±1% or ±2µm
(±0.08mil)
0-800µm (0-32mils) 1µm (0.1mil)

T35511964

F6 Standard

t35511964 rgb 0-25mm
(0-1000mil)
±2% or ±100µm
(±4mils)
0-500µm (0-200mils)
5000-25000µm (200-1000mils)
10µm (0.5mil)
50µm (2mil)

T35511982

N1 Standard

t35511982 rgb 0-1500µm
(0-60mils)
±1% or ±1µm
(±0.04mil)
0-200µm (0-8mils)
200-500µm (8-20mils)
500-1500µm (20-60mils)
0.1µm (0.005mil)
0.5µm (0.02mil)
1.0µm (0.05mil)

T35511983

N1 Right Angle

t35511983 rgb

T35511984

N2 Standard

t35511984 rgb 0-5mm
(0-200mils)
±1% or ±15µm
(±0.6mil)
0-500µm (0-20mils)
500-5000µm (0-200mils)
2µm (0.1mil)
5µm (0.2mil)

T35511980

N4 Standard

t35511980 rgb 0-250µm
(0-10mils)
±1% or ±1µm
(±0.04mil)
0-250µm
(0-10mils)
0.1µm (0.05mil)

 

Elcometer 355 Probe Accessories


355_jumbo JUMBO HAND GRIP
Ideal for precision placement for the most accurate results on flat and curved surfaces. Place the probe inside the Jumbo Hand Grip and take measurements - ideal when wearing gloves.
T9997766- Jumbo Hand Grip - F and N Probes
Use with the following Elcometer 355 probes:
F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard

 

355_vadaptor V-PROBE ADAPTOR
Ideal for precision placement for the most accurate results on medium and large diameter curved surfaces such as pipes and cylinders.
T9997381 V-Probe Adaptor - F and N Probes
Use with the following Elcometer 355 probes:
F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard

 

355_blanket_probe SOFT MATERIAL/BLANKET PROBE

Ideal for taking precision readings on soft coatings or printing blankets. The wide, flat base design acts as a load spreader, reducing the total force at a single point.

T35511963 Soft Material/Blanket Probe for the Elcometer 355

 

355_probe_jig PROBE PLACEMENT JIG
For the most reliable and repeatable coating thickness measurements, making the gauge score highly in repeatability and reproducibility studies. Ideal for small and large components alike. The probe placement jig is supplied with a probe housing to suit standard F1, F2, F4, F5 and N1 probes. Housings to suit other probes are available as optional accessories.
T95012880 Probe Placement Jig
T95013028 Component Hand Vice - a simple vice to hold small components
T95012888 Cable Release Assembly - ideal for remote measurements
T95015589 N4 Probe Adaptor - must be purchased for use with N4 Probes
Use with the following probes:
F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard and N4 Standard

 

µ
Terms & Conditions | Company Policies | ISO Certifications | Press | Sitemap | Copyright | © Elcometer Limited 2013
Buy soma online
Buy klonopin online