Elcometer 130 SCM 400 Salt Contamination Meter

elcometer.com

Coating Inspection

Surface Cleanliness

Surface Contamination Kits

Data Sheet Instruction Manual

Product Description

Soluble salts on a surface are absorbed into a special filter paper soaked with distilled water. The Elcometer 130 SCM 400 measures the conductivity of the wet paper, calculates the salt level and displays it in µg/cm².

Suitable for a wide range of shapes, orientations, surfaces and finishes.
Quick and simple to use.
Battery operated and portable.
Confirms adequate cleaning of surfaces before coating, aiding the prevention of premature coating failure.
Shows salt build-up on vulnerable surfaces, which can be cleaned to increase the lifetime of a coating.
Test papers can be re-moistened and a similar test result can be achieved; ideal for proof and ISO requirements.
Accurate.
Repeatable.
Reproducible.

Can be used in accordance with SSPC Guide 15

Technical Specification

Part Number	Description
E130----1	Elcometer 130 SCM 400 Salt Contamination Meter
Range	0.1 - 20µg/cm²
Resolution	0.1µg/cm²
Accuracy	±10%
Operating Range	5°C - 40°C (41°F - 104°F) <80% rh="" td="">
Power Supply	9V Battery 6LR61 (MN1604)
Numbers of tests	Approximately 500 measurements before recharge
Sample Time	2 minutes
Sampling Size	110mm (4.3”) circle, or part of
Weight	1.5kg (3.3lb)
Dimensions	200 x 190 x 60 mm (7.9 x 7.5 x 2.4”)
Certificate available	Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.
Packing List	Elcometer 130 Salt Contamination Meter,100 x high purity test papers,250ml (8.5fl oz) pure water, 8 x replacement plate support pads, 20 x PVC storage bags, disposable gloves, tissues, 3 x 2ml (0.06fl oz) syringes, plastic tweezers, plastic sample bottle, carry case and operating instructions

Can be used in accordance with
SSPC Guide 15

Accessories

Accessories
T99911344	Pure Water - 250ml (8.5fl oz) Bottle
T1304469-	100 High Purity Test Papers
T1304472-	Medical Wipes (1 Pack)